guys with super victor intake step in
#1
guys with super victor intake step in
I want to see dyno sheets for super victor cars specially above 7000rpm
i have stroked motor and I'm thinking to switch the 90 Fast to super victor so i can spin the motor to 7400
i have stroked motor and I'm thinking to switch the 90 Fast to super victor so i can spin the motor to 7400
#3
TECH Regular
iTrader: (1)
Join Date: Jun 2007
Location: Saudi Arabia, Qatif
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
If you are looking for the max power you need to use the victor jr without elbow !
I recommend to use 1000 cfm TB ( 4 bbl ) with scope in your hood
my friend has done an A4 GTO 383cid with carb setup without an elbow and he put down 520 rwhp with small headers
elbow is a restrection .. there is a member here from Kuwait have 408 with ls1 intake and put down 460 rwhp .. and after the victor jr with an elbow it made 430 rwhp !! .. 30 hp less than ls1 intake !
Put in mind that the cam specs can play alot in this setup
I recommend to use 1000 cfm TB ( 4 bbl ) with scope in your hood
my friend has done an A4 GTO 383cid with carb setup without an elbow and he put down 520 rwhp with small headers
elbow is a restrection .. there is a member here from Kuwait have 408 with ls1 intake and put down 460 rwhp .. and after the victor jr with an elbow it made 430 rwhp !! .. 30 hp less than ls1 intake !
Put in mind that the cam specs can play alot in this setup
Trending Topics
#11
#15
9 Second Club
iTrader: (10)
A stock ported 78mm throttle body can flow 700-800 cfm. Most cars can benefit from a larger 90mm throttle body. Hey man if you don't think you need a 1300 cfm throttle body I doubt you need a super victor. Not sure what qualifications or evidence you have to back this theory up. Keep in mind the cam requirements for a carb style intake are much different than our OEM style intakes.
#18
I called Patrick G regarding the cam and the whole combination he told me it will work and will net some thing between 30-40 whp
#19
that cam is nowhere close to what is needed for a single plane intake. a factory style intake and a single plane require different valve timing events. i think that is what s346k is trying to say.