datalogging with aem wideband.
01-29-2010, 04:51 PM
#1
Staging Lane
Thread Starter
iTrader: (2)
Join Date: Mar 2007
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
datalogging with aem wideband. how do I data log my aem wideband to my pc. I see it has the wire to do so but what do I hook this up to? btw car is not computer controlled. Its my nova thats running e85
this is the part in the instructions where im confused "RS 232 serial data output port for data logging without an engine management system" . what exactly do i do with the wire?
this is the part in the instructions where im confused "RS 232 serial data output port for data logging without an engine management system" . what exactly do i do with the wire?
01-30-2010, 04:07 PM
#3
I doubt it unless you are a good hacker, the serial protocol is most likely not the same.
I know you can view it thru HyperTerminal but it would not do you any good without a way to log
AFR against MAP or at least RPM ect.
An external data logger is your best bet.
I know you can view it thru HyperTerminal but it would not do you any good without a way to log
AFR against MAP or at least RPM ect.
An external data logger is your best bet.
