new motor by mistake
02-09-2010, 04:06 PM
#1
7 Second Club
Thread Starter
iTrader: (42)
Join Date: Jun 2004
Location: paducah, ky
Posts: 4,558
Likes: 0
Received 0 Likes
on
0 Posts
new motor by mistake well we finally pulled the old motor out and found some things we werent suprised to see.... just didnt want to see....
now its just a reason to put together the motor we wanted initially.
parts on the way for a 565...
dart block - JE pinston - BME rods-lunati crank- hellfire ring-roller cam bearing-vacuum pump - same heads (canfield casting , holley heads worked over by jimmy bridges) jessel arms. going back to a single fogger.... looking for about 900hp on motor... quite a bit more on the kit
i guess we'll see if a BBC in a 4th gen can get down on a 275 this year...
with all the changes it should be a good year...
now its just a reason to put together the motor we wanted initially.
parts on the way for a 565...
dart block - JE pinston - BME rods-lunati crank- hellfire ring-roller cam bearing-vacuum pump - same heads (canfield casting , holley heads worked over by jimmy bridges) jessel arms. going back to a single fogger.... looking for about 900hp on motor... quite a bit more on the kit
i guess we'll see if a BBC in a 4th gen can get down on a 275 this year...
with all the changes it should be a good year...
