fuel rail covers for my camaro
#1
fuel rail covers for my camaro
Did a search on this but didnt find any type of write ups on getting the Covers on my 2000 Ls1 with a ls6 intake manifold. maybe i missed it?
On The passenger side, looks like the bigger wire harness is in the way, along with the location of the dipstick.
Does anyone have a link, or a write up on what needs to be done to get the fuel rail covers on?
These are fuel rail covers off the 1999 FRC corvette
any help is much appreciated!
On The passenger side, looks like the bigger wire harness is in the way, along with the location of the dipstick.
Does anyone have a link, or a write up on what needs to be done to get the fuel rail covers on?
These are fuel rail covers off the 1999 FRC corvette
any help is much appreciated!
#2
TECH Addict
iTrader: (3)
Join Date: Oct 2007
Location: Orange County
Posts: 2,543
Likes: 0
Received 0 Likes
on
0 Posts
just cut them a little at time so you don't end up with half a fuel rail cover. and drill a small hole for the dip stick, not a slot. when you put the cover on, just take out the dipstick then put it back in when the cover is in place, looks 100% better.