Question??
#1
On The Tree
Thread Starter
Join Date: Feb 2009
Location: New Orleans ,LA
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Question??
Hey guys I just installed my new wheels and I'm currently running a 18x10.5 with a BFG 315/30/18 dr in the rear. I want to lower it a little bit but I'm not sure if I'll run into any problems with such a tight fit in the rear. So any suggestions or info would be appreciated. In other words let me know what needs to be done for a 1 to 2 inch drop. Thanks in advance
#3
Hello
Like mentioned above! You might have to make some extra clearance for the rear tires. And when you do lower the vehicle I would highly suggest going with a adjustable pan hard bar to allow you to center the rear up in the car due to it shifting anytime a vehicle is lowered. Below is a link to show you what types of pan hard bars the UMI Performance has to offer!
http://www.umiperformance.com/catalo...qqngup21bgaon1
If you have any other questions feel free to ask!
Thanks
Brad
Like mentioned above! You might have to make some extra clearance for the rear tires. And when you do lower the vehicle I would highly suggest going with a adjustable pan hard bar to allow you to center the rear up in the car due to it shifting anytime a vehicle is lowered. Below is a link to show you what types of pan hard bars the UMI Performance has to offer!
http://www.umiperformance.com/catalo...qqngup21bgaon1
If you have any other questions feel free to ask!
Thanks
Brad