Street Racing & Kill Stories - 1st kill with the new build




View Full Version : 1st kill with the new build


David Q
02-24-2010, 08:50 PM
Today was the first day to take the car out after the rebuild, and it sure ran good. Heads,cam, intake,ported tb,converter,long tubes, and a great tune. Sure enough during one of the many passes on the main road we attracted some attention form a Z28 SS. The Z didn't stand a chance. Instant 4000 rpm tires screaming, just ripping the tread off. It felt good to be able to just let off because they didn't even stand a chance. It was well worth all the work put into the car.


DaytonaFIC6
02-24-2010, 08:54 PM
sounds like you have a nice build working for ya. what exactly is a Z28 SS? I didn't know such a thing existed. I thought it was either a Z28 or an SS.

Sticks n Stones
02-24-2010, 08:55 PM
Nice!!!!!!!! I can't wait for to order my heads! Got everything I need except the actual L92/LS3 heads to do a LS3 heads/intake swap. Should give me a solid 120+rwhp gain! What numbers did yours put down when they tuned it?


ss_slowmaro
02-24-2010, 08:56 PM
sounds like you have a nice build working for ya. what exactly is a Z28 SS? I didn't know such a thing existed. I thought it was either a Z28 or an SS.

every SS is a z28, its just a z28 with a ss appearance package from the factory and are a numbered build

David Q
02-24-2010, 09:03 PM
The car made 388/346 through stock mufflers, and without locking coverter.

DaytonaFIC6
02-24-2010, 09:55 PM
every SS is a z28, its just a z28 with a ss appearance package from the factory and are a numbered build

I see. I understand that they are both LS1's. I just thought there was more of a distinct difference, ie suspension, slightly more power, etc.

ss_slowmaro
02-24-2010, 10:21 PM
I see. I understand that they are both LS1's. I just thought there was more of a distinct difference, ie suspension, slightly more power, etc.

You are correct sir, the ss package can come with upgraded suspension, and the slightly more power can be due to a blackwing lid from slp along with a few other slp and factory goodies.

ScreaminRedZ
02-25-2010, 07:01 AM
Good kill, man! It's always fun to test out the new mods by lining up against another car :devil:

Nice!!!!!!!! I can't wait for to order my heads! Got everything I need except the actual L92/LS3 heads to do a LS3 heads/intake swap. Should give me a solid 120+rwhp gain! What numbers did yours put down when they tuned it?

You're going with a cam too right?

necrocannibal
02-25-2010, 07:42 AM
There is no power difference at all. A Z28 can dyno higher than a SS just depends on the car. The suspension is a little different but not enough to talk about. Appearance is the main difference. My Ws6 dyno 328 rwhp stock and 30 minutes later the same year non WS6 T/A dynoed 326 rwhp. Its just depends on the car.

TheBlueKnight
02-25-2010, 08:54 PM
There is no power difference at all. A Z28 can dyno higher than a SS just depends on the car. The suspension is a little different but not enough to talk about. Appearance is the main difference. My Ws6 dyno 328 rwhp stock and 30 minutes later the same year non WS6 T/A dynoed 326 rwhp. Its just depends on the car.

Holy Sh*t, here we go. I'll check in tomorrow when this thread is 12 pages long with everyone arguing over the differences of WS6's, SS's, Z28's, and trans ams.:eyes:

Good Kill OP, sounds like a strong set up.

DaytonaFIC6
02-25-2010, 10:00 PM
uh oh! I didn't mean to start a big long discussion about the differences. I have never owned an Fbody and just was trying to get to know the cars a little better. Are you saying that SS's and WS6's have more than just appearence differences?

Sticks n Stones
02-25-2010, 11:57 PM
Good kill, man! It's always fun to test out the new mods by lining up against another car :devil:

You're going with a cam too right?

What I got literally sitting on a shelf behind me:
Comp Cams 227/231 dur. .613"/.617" 112lsa
L92 roller rockers w/ stud girdles
full gasket kit
ARP head stud kit
Phoenix Performance 3400 stall triple disk w/antiballooning plate
bigass Derale Atomic trans cooler w/fan
Pedders zero drop rear springs w/drag bags
stock LS3 intake

What I need still:
ported L92 or LS3 heads w/springs.
a weekend on my brothers lift (easier said than done: I've only had 2 weekends off this year so far)

necrocannibal
02-26-2010, 07:25 AM
uh oh! I didn't mean to start a big long discussion about the differences. I have never owned an Fbody and just was trying to get to know the cars a little better. Are you saying that SS's and WS6's have more than just appearence differences?


Not really. Suspension is a little different, exhaust is a little different. LS1 is the same, they all make the same power.