traction controll ???
#3
TECH Enthusiast
iTrader: (5)
Join Date: Apr 2009
Location: Houston, TX
Posts: 637
Likes: 0
Received 0 Likes
on
0 Posts
and it feels like someone is pushing your foot back up... lol iunno if thats just me or somethin actually does that... lol and when you forget to turn asr off and go to spin your tires and it sounds like your broke something and you look like a jack ***
#5
TECH Senior Member
if EBCM determines that wheels are spinning, EBCM asks PCM to reduce engine torque and so PCM retards timing;
if EBCM determines that wheels are still spinning, EBCM asks ASM to reduce engine torque and so ASM asks ACA to close throttle angle (in F-car you feel throttle pedal pushing back);
if EBCM determines that wheels are still spinning, it applies either of rear brakes.
EBCM = electronic brake control module.
ASM = accelerator and servo control module.
ACA = accelerator control and adjuster.
Last edited by joecar; 02-27-2010 at 05:28 PM.
#6
TECH Enthusiast
iTrader: (5)
Join Date: Apr 2009
Location: Houston, TX
Posts: 637
Likes: 0
Received 0 Likes
on
0 Posts
There are 3 stages:
if EBCM determines that wheels are spinning, EBCM asks PCM to reduce engine torque and so PCM retards timing;
if EBCM determines that wheels are still spinning, EBCM asks ASM to reduce engine torque and so ASM asks ACA to close throttle angle (in F-car you feel throttle pedal pushing back);
if EBCM determines that wheels are still spinning, it applies either of rear brakes.
EBCM = electronic brake control module.
ASM = accelerator and servo control module.
ACA = accelerator control and adjuster.
if EBCM determines that wheels are spinning, EBCM asks PCM to reduce engine torque and so PCM retards timing;
if EBCM determines that wheels are still spinning, EBCM asks ASM to reduce engine torque and so ASM asks ACA to close throttle angle (in F-car you feel throttle pedal pushing back);
if EBCM determines that wheels are still spinning, it applies either of rear brakes.
EBCM = electronic brake control module.
ASM = accelerator and servo control module.
ACA = accelerator control and adjuster.