PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

Help Running very rich on driverside.

Thread Tools
 
Search this Thread
 
Old 03-09-2010, 08:39 PM
  #1  
Teching In
Thread Starter
iTrader: (-1)
 
fabb's Avatar
 
Join Date: Nov 2006
Location: asheville nc
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Default Help Running very rich on driverside.

I have a 2000 z28 m6 longtube headers, tr230 cam, !air, !egr, !evap. The only code I am getting is a vss code because I converted to a th350. It has been tuned with hptuners and all the codes for the air, evap, and egr also the rear o2s and random misfire for the cam. I have replaced all the coil packs and been through like 5 sets of plugs. it runs great for about the first 2 or 3 minutes and then starts to break up and pop and crack under any kind of load and it always fouls all 4 driver side plugs and the passenger side plugs look perfect. Please this has me baffled any suggestions will be very much appreciated.
Old 03-10-2010, 08:17 AM
  #2  
TECH Addict
iTrader: (3)
 
moehorsepower's Avatar
 
Join Date: Feb 2003
Location: Texas
Posts: 2,334
Likes: 0
Received 17 Likes on 14 Posts

Default

Sounds like a bad O2 on that side, do you have anyway to check the activity of the O2's?
Old 03-10-2010, 10:26 AM
  #3  
TECH Junkie
iTrader: (33)
 
JonCR96Z's Avatar
 
Join Date: Jan 2003
Location: Asheboro, NC
Posts: 3,008
Likes: 0
Received 18 Likes on 10 Posts

Default

Yep, your O2 is going out. It's just not bad enough yet to report a code though. You can try switching your front O2s from side to side to see if the problem follows just to verify.




All times are GMT -5. The time now is 02:52 AM.