Saw a trick on here but forgot HELP!!!
03-10-2010, 09:08 PM
#1
Teching In
Thread Starter
Join Date: Dec 2009
Location: one step ahead of you
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Saw a trick on here but forgot HELP!!! I saw a trick on here about three months ago about taking the stock master cylinder line off a drilling it out. If anyone knows what im talkin about please help me. I finally got my cam and heads put in and I forgot all about my clutch never workin right before i started my cam swap.
03-10-2010, 09:23 PM
#2
TECH Veteran
iTrader: (14)
Join Date: Apr 2005
Location: N. Falmouth MA
Posts: 4,085
Likes: 0
Received 0 Likes
on
0 Posts
I put that on my cardmain page ages ago.. About 1/2 way down..
http://www.cardomain.com/ride/463707/2
http://www.cardomain.com/ride/463707/2
03-10-2010, 10:09 PM
#3
TECH Resident
iTrader: (3)
Join Date: Sep 2007
Location: Holmes County (thats right Amish Country), OHIO
Posts: 896
Likes: 0
Received 1 Like
on
1 Post
I think this is what you want: http://www.installuniversity.com/ins...sity/index.htm
Then click on install documents on the left side and scroll down to the transmission section. The write up is under Master cylinder "drill mod". You would just need the drill mod part of it.
Then click on install documents on the left side and scroll down to the transmission section. The write up is under Master cylinder "drill mod". You would just need the drill mod part of it.