ls mustang newbie
03-21-2010, 05:09 PM
#1
Teching In
Thread Starter
Join Date: Feb 2010
Location: sioux city IA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
ls mustang newbie new here from the midwest i have a 2001 mustang that im currently in the process of doin an ls swap into so far its all going along really great and almost done ive drove the car a couple times now wiht jus minor flaws should be quite fun when its done
ls1 346
MSD 6010 6al
2 step
edelbrock victor jr intake
800 proform carb
edelbrock nitrous plate 100-250 jets
nos purge
nos nitrous timed controller
custom headers
TH350
3500 stall
granatelli a arms
granatelli drag coilovers
granatelli k member
DKT motor mounts
holly fuel pump
holly fuel regulator
sumped tank
mickey thompson drag radials 275/50/15
soon to come
04 cobra front bumper
04 v6 rear bumper
6 inch cowl hood
8 point cage
ls1 346
MSD 6010 6al
2 step
edelbrock victor jr intake
800 proform carb
edelbrock nitrous plate 100-250 jets
nos purge
nos nitrous timed controller
custom headers
TH350
3500 stall
granatelli a arms
granatelli drag coilovers
granatelli k member
DKT motor mounts
holly fuel pump
holly fuel regulator
sumped tank
mickey thompson drag radials 275/50/15
soon to come
04 cobra front bumper
04 v6 rear bumper
6 inch cowl hood
8 point cage
03-21-2010, 05:15 PM
#2
Teching In
iTrader: (3)
Join Date: Jul 2009
Location: mishawaka indiana
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
welcome, what brand converter are you using? ive been thinking about doing a swap along those lines with a th350 and ive heard you need a special converter, i havent looked into it yet because im still mapping out what i want to do, but definetly sounds like a fun car
03-21-2010, 05:22 PM
#3
Teching In
Thread Starter
Join Date: Feb 2010
Location: sioux city IA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
thats what i had heard to but i just your normal converter and i used flexplate from a 5.3 and it lined up and bolted together just fine so idk what the deal is
03-21-2010, 05:45 PM
#4
Welcome to the dark side! I'm sure you will surprise many with that set up. I have a friend who just transplanted a LS1 out of a 1999 trans am into his 1995 mustang Cobra, it was a lot of work but he did it, took him some time but he seems pretty happy with the way car runs, he's adding N2O for an added fun factor. 
