50chevy

iTrader: (2)

I am modifying the existing harness for my 2001 ls1-based engine and I am shortening the wires that are way too long. I am pulling the excess wiring out of the PCM plugs and going to cut them and put new pins on the end. I do not want to cut the wires shorter and re-solder the old pins on the end. I have called many of the major harness manufacturers and they refuse to sell me any components, they just want me to buy a new harness. Can anyone tell me where I can buy just the individual pins that are inside the red/blue PCM connectors? This is the last thing that is keeping me from starting my new stroker motor. The picture below shows the pins I am talking about.

SScam68

iTrader: (20)

http://www.eficonnection.com/eficonn...terminals.aspx

4Runoma

iTrader: (1)

does anyone have an updated link to there pins? the link doesn't work anymore

sssuch

I had to order them from a large electrical supply that carried Delphi , large quanity and special order price. Now I got plenty leftover for sale . 1 to 10- $1.00 ea, 11 to 20 - $.90 ea 20 or more $.80 ea shipped. Stan

Pocket

iTrader: (22)

mouser sells them ALOT cheaper than that, but the correct crimper is extremely expensive

spaulding

iTrader: (1)

U can get a good crimper from mac or snapon thats a manual not ratcheting type for not to much money i forget where i got my pins but i think it was eficonnection