Drag Racing Results - 10.57@131 w/ an old truck motor cam only full weight 6spd and a jug

The video has all the specs on the car. This is my daily driver that I've put 30K miles on in 2009! It's got all the creature comforts like A/C etc! Full weight!

Ran 11.59@121 NA and made 393hp/384tq on Bluecats Dyno in Ashland KY

Video is at Clay City KY Mountain Park Dragway on 3/20/2010
DA at times of runs was calculated at 1500ft

6.0L Trans Am 10.57@131 Pass (http://www.youtube.com/watch?v=GVJYweGlkGk)

Heres the slips backed up within the hour to within a thousandth of a second!
http://i44.photobucket.com/albums/f49/IntegraVTEC/cf9464e9.jpg

That's getting it done, congrats!

more specs, how big is the cam what intake etc...

nice results for sure

LQ4 Bottom End - Stock w/ ARP rod bolts
5.3L Heads - unported with LS1 valves
G5X3 Cam - (234/242 .600/.610 114lsa)
LPE Ported FAST90/NW90
Pacesetter LT's and ORY
Stock Catback with magnaflow muffler
Moser 9" - 3.89 gear
26x10.0 Slicks
NX 150 Shot

Car made 393rwhp/381rwtq at Bluecats NA

impressive, ive run a 6.9 @ 101 on a 100 shot 408

Nice! I'm building my Camaro right now with a 11.7:1 compression 403 with TFS235 heads and a rather large cam... I'm hoping I can make it run these numbers NA with alot nicer parts and a lighter weight car.

Nice! I'm building my Camaro right now with a 11.7:1 compression 403 with TFS235 heads and a rather large cam... I'm hoping I can make it run these numbers NA with alot nicer parts and a lighter weight car.

that wont be a problem with your set up. Im running the tfs 235 heads on my car, 423 ci ,12.1 compression @ 3400lbs and it s running 6.50's @ 106 on motor w/ a nitrous stall and nitrous cam. :D

that wont be a problem with your set up. Im running the tfs 235 heads on my car, 423 ci ,12.1 compression @ 3400lbs and it s running 6.50's @ 106 on motor w/ a nitrous stall and nitrous cam. :D

Thats good to know! I will be starting the motor up for the first time this week once I get the tranny put in and will have it to the track in 2-3 weeks after tuning and break in. I know it's gonna have to do something cause these TFS235 heads are pure badass!

yes they are.

What did the rest of your timeslip look like? I've got alot of time left in the 60ft on mine but I'm just trying to get a run down on some more variables between our setup's. The DA at the time of my quicker run's was 1987ft.

My timeslip looks like this:
1.68 60ft
4.60 330ft
7.02@102mph
10.86@129mph

how much does your camaro weigh?

how much does your camaro weigh?

I've never weighed it but a guess would be around 34-3500 without me in it.

great times.