boosted4life

iTrader: (4)

I was wondering how the pcm grounds? I have been having problems with my 98 ss camaro ls1 after a motor install and it will not fire up. The local gm dealership told me they corrected a few wires but it needed a new pcm, I installed a new pcm and it still will not fire up just doing the same things as before. Any help would be great..

Also there is a braided flat ground strap on the driver side, I was wondering where that connects to?

boosted4life

iTrader: (4)

nobody?

boosted4life

iTrader: (4)

??????

sjsingle1

iTrader: (1)

that braided strap bolts somewhere behind the ALT.....but there is also a ground from the BATT right above the starter

boosted4life

iTrader: (4)

Thanks.. and I got the ground near the starter.

dgcustomz

iTrader: (127)

There is also a ground in the back of the driverside cylinder head. Did you hook that one up? It comes out from the wiring harness at the back of the driver engine bay.

boosted4life

iTrader: (4)

Yea that's hooked up..

boosted4life

iTrader: (4)

Any more ideas on what is causing it to not start??

Ws6kid.

Got a similar issue =/

LS1MCSS

iTrader: (18)

How many wires? There is more than one wire.