hex vs splined quick release wheel
04-08-2010, 02:07 PM
#1
On The Tree
Thread Starter
iTrader: (13)
Join Date: Aug 2006
Location: st.louis,Mo
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
hex vs splined quick release wheel fabbing up the entire steering system and was woundering if anybody is using the hex style quick release steering hub. Only thing i can think is it might have more play in it vs a splined hub. Kinda like a poorly fitting socket on a bolt head.
Hex hubs are a good bit cheaper then splined so i figured id ask.
I was also woundering if people were using an actual flange seal where the coloumn goes through the firewall or just drilling and welding a plate to the coloumn.
thanks.
Hex hubs are a good bit cheaper then splined so i figured id ask.
I was also woundering if people were using an actual flange seal where the coloumn goes through the firewall or just drilling and welding a plate to the coloumn.
thanks.
