Quick SSilver 98

iTrader: (2)

Is this good or bad for what I have, mods are in sig. Here is my time slip.

60 ft---2.3729
330 ft--- 6.1131
ER @ 594 FT--- 8.5141
1/8 ET--- 9.0491
1/8 MPH--- 84.11
1/4 ET---13.6490
1/4 MPH--- 107.60

I was thinking I should be trapping at least around 110. If i cut my 60 FT down to at least 1.9 would that get me there. I dont think I was granny shifting either I would spin 3rd out to about 6300 RPM before I crossed the 1/4 mile line. I was on street tires btw and it was my very first time to the track also I just could not get the tires to hook really good in any gear. Thanks.

bigj2717

iTrader: (15)

Yeah you should run better then that. Get some tires and cut down your 60 foot and you should do a lot better. Just don't launch too hard because you will break your rear end

blk/slvr02ss

iTrader: (21)

107mph is good for high 12's but the more u get your 60's down u will gain mph.

S_carve

iTrader: (1)

My bone stock 01 SS M6 ran a 13.51 @ 103.9 if thats any reference.

358chevycamaro

iTrader: (10)

I can't believe no one has asked this before passing judgement on your pass...

Whats the tracks elevation and what was the DA?

94Z28rag

iTrader: (10)

Yikes...CAI, catback, tune had my 160k mi LT1 convertible running 13.2 @ 106.


But like said above it all depends on DA, etc.