o2 help please
#1
o2 help please
I got my denso o2s, and just recieved my racetronix teflon extensions (got long tubes and true duals). I was gonna install the o2s tomorrow as its such a fast simple install.
But, as I was reading through the ngk site as im looking for new plugs and wires I see this...
- M18 o2 sensors - Install finger tight then 1/2-3/4 turn with wrench / O2 sensor socket 26-33ft. lbs.
- M12 o2 sensors - Install finger tight then 3/4 - 1 turn with wrench / O2 sensor socket 13.2 -17ft. lbs.
Then it talks about when to use gaskets, or a flange, and all this crap.
QUESTION....
So does anyone know what torque i should screw the o2s?
Also, i dont have any gasket or a flange for each sensor, neither did my old ones, never thought you needed one but come to think of it without a gasket just like any other part of the exhaust, it could then leak right? I checked google and it seems alot of people have the flanges.
Can anyone chime in I wanna get this thing running asap
But, as I was reading through the ngk site as im looking for new plugs and wires I see this...
- M18 o2 sensors - Install finger tight then 1/2-3/4 turn with wrench / O2 sensor socket 26-33ft. lbs.
- M12 o2 sensors - Install finger tight then 3/4 - 1 turn with wrench / O2 sensor socket 13.2 -17ft. lbs.
Then it talks about when to use gaskets, or a flange, and all this crap.
QUESTION....
So does anyone know what torque i should screw the o2s?
Also, i dont have any gasket or a flange for each sensor, neither did my old ones, never thought you needed one but come to think of it without a gasket just like any other part of the exhaust, it could then leak right? I checked google and it seems alot of people have the flanges.
Can anyone chime in I wanna get this thing running asap
Last edited by SimRacer1; 04-24-2010 at 03:29 PM.