Who can Weld? (headers)
#1
TECH Fanatic
Thread Starter
iTrader: (39)
Join Date: Jul 2007
Location: Lewisville, Texas
Posts: 1,691
Likes: 0
Received 0 Likes
on
0 Posts
Who can Weld? (headers)
ok, im looking for someone that can weld up the egr and air ports on my headers... i removed all that stuff and have block off plates on them now but on the EGR one while taking it off one of the bolt heads stripped off so i dont have a very good seal there. i want to cut off the ports and have them welded shut. let me know if anyone can help out here. im in lewisville. thanks
-Kris
-Kris
#5
TECH Resident
iTrader: (12)
Join Date: Apr 2006
Location: Lantana, TX
Posts: 956
Likes: 0
Received 0 Likes
on
0 Posts
Run it down to mill street and go to Miller muffler or the boat impellor place. the boat shop has welded a couple things for me in the past. They are past RPM's old shop on the right before Valley Ridge. There is a welding shop right next to Miller Muffler too.
I still have the roller too. Apparently everyone that said they needed one doesn't, lol.
I still have the roller too. Apparently everyone that said they needed one doesn't, lol.
#7
TECH Fanatic
Thread Starter
iTrader: (39)
Join Date: Jul 2007
Location: Lewisville, Texas
Posts: 1,691
Likes: 0
Received 0 Likes
on
0 Posts
Run it down to mill street and go to Miller muffler or the boat impellor place. the boat shop has welded a couple things for me in the past. They are past RPM's old shop on the right before Valley Ridge. There is a welding shop right next to Miller Muffler too.
I still have the roller too. Apparently everyone that said they needed one doesn't, lol.
I still have the roller too. Apparently everyone that said they needed one doesn't, lol.
the ones i have gone to say they wont touch the headers... they are still on the car, were yours on or off?