allblacksrt4
05-11-2010, 07:34 PM
1973 Datsun 240z. $5000obo
Car is a clean title, Registration is up to date. Car is in my name. Car was built by me, i did not buy it swapped. Car had the roll cage before i bought it. Car is clean with no rust.
Its has a 5.3 LM7 Motor. Which is from the lsx family. It has 706 heads which flow as good as ls6 heads. Motor has 42k miles on it. Came out of a 2005 silverado. Car is a full street car. Everthing works headlights, taillights, turn signals, windshield wiper and hazard light. The car is very simple to work on. I did all the hard work. All the wiring and relays are labeled. This swap is much easier to work on then a efi swap. Car even with the cage is big guy friendly. My buddy who is 6'2 300 pounds can fit in this car. This car has alot of money into it.
MODS:
Johns cars LS1 swap kit
JTR - Radiator Kit
JTR - LS1 Swap headers
Wenco - Custom driveshaft
Victor Jr intake manfold
holley 750 dp with 50cc accelerator pump
MSD 6010 box - can use pills or tune on laptop
LS! Car oil pan
New starter
Hughes th350 swap flywheel - SFI approved
TCI - 2800 stall
TH350 - Rebuilt with all b&m performance parts
B&M suppercooler transmission cooler
B&M hammer shifter ratchet shifter
Holley red pump
10 Point roll gauge. very nice cage lots of time and money spent on it
Rear window and small 1/4 windows are lexan
Race seats with 5 point harness
Electric water temp gauge
2 5/8 volt and oil pressure gauge
Autogauge tach - comes with but not wired yet
Car runs good, no mechanical issues. Car has less then 30 miles on it since the swap.
Cons - Front driver side fender has a dent from someone backing into it - comes with a clean headlight surrounding
rear lexan is starting to have some cracks
paint does have fading on roof
Car is open header does come with a 3" muffler. Exhaust shop qouted me $250 for a nice 2 1/2" dual exhaust
Needs wheel cyl rebuilt.Rebuild kit included
Call me with any questions (818)577-0310 - Jason
Running video. Car is open Header.
http://i46.photobucket.com/albums/f103/fastishott/th_MOV00902.jpg (http://s46.photobucket.com/albums/f103/fastishott/?action=view¤t=MOV00902.flv)
http://i46.photobucket.com/albums/f103/fastishott/DSC04972.jpg
http://i46.photobucket.com/albums/f103/fastishott/DSC04977.jpg
http://i46.photobucket.com/albums/f103/fastishott/DSC04961.jpg
http://i46.photobucket.com/albums/f103/fastishott/DSC04965.jpg
http://i46.photobucket.com/albums/f103/fastishott/DSC04980.jpg
http://i46.photobucket.com/albums/f103/fastishott/DSC04981.jpg
http://i46.photobucket.com/albums/f103/fastishott/DSC04979.jpg
http://i46.photobucket.com/albums/f103/fastishott/DSC04978.jpg
http://i46.photobucket.com/albums/f103/fastishott/DSC04973.jpg
http://i46.photobucket.com/albums/f103/fastishott/DSC04975.jpg
Car is a clean title, Registration is up to date. Car is in my name. Car was built by me, i did not buy it swapped. Car had the roll cage before i bought it. Car is clean with no rust.
Its has a 5.3 LM7 Motor. Which is from the lsx family. It has 706 heads which flow as good as ls6 heads. Motor has 42k miles on it. Came out of a 2005 silverado. Car is a full street car. Everthing works headlights, taillights, turn signals, windshield wiper and hazard light. The car is very simple to work on. I did all the hard work. All the wiring and relays are labeled. This swap is much easier to work on then a efi swap. Car even with the cage is big guy friendly. My buddy who is 6'2 300 pounds can fit in this car. This car has alot of money into it.
MODS:
Johns cars LS1 swap kit
JTR - Radiator Kit
JTR - LS1 Swap headers
Wenco - Custom driveshaft
Victor Jr intake manfold
holley 750 dp with 50cc accelerator pump
MSD 6010 box - can use pills or tune on laptop
LS! Car oil pan
New starter
Hughes th350 swap flywheel - SFI approved
TCI - 2800 stall
TH350 - Rebuilt with all b&m performance parts
B&M suppercooler transmission cooler
B&M hammer shifter ratchet shifter
Holley red pump
10 Point roll gauge. very nice cage lots of time and money spent on it
Rear window and small 1/4 windows are lexan
Race seats with 5 point harness
Electric water temp gauge
2 5/8 volt and oil pressure gauge
Autogauge tach - comes with but not wired yet
Car runs good, no mechanical issues. Car has less then 30 miles on it since the swap.
Cons - Front driver side fender has a dent from someone backing into it - comes with a clean headlight surrounding
rear lexan is starting to have some cracks
paint does have fading on roof
Car is open header does come with a 3" muffler. Exhaust shop qouted me $250 for a nice 2 1/2" dual exhaust
Needs wheel cyl rebuilt.Rebuild kit included
Call me with any questions (818)577-0310 - Jason
Running video. Car is open Header.
http://i46.photobucket.com/albums/f103/fastishott/th_MOV00902.jpg (http://s46.photobucket.com/albums/f103/fastishott/?action=view¤t=MOV00902.flv)
http://i46.photobucket.com/albums/f103/fastishott/DSC04972.jpg
http://i46.photobucket.com/albums/f103/fastishott/DSC04977.jpg
http://i46.photobucket.com/albums/f103/fastishott/DSC04961.jpg
http://i46.photobucket.com/albums/f103/fastishott/DSC04965.jpg
http://i46.photobucket.com/albums/f103/fastishott/DSC04980.jpg
http://i46.photobucket.com/albums/f103/fastishott/DSC04981.jpg
http://i46.photobucket.com/albums/f103/fastishott/DSC04979.jpg
http://i46.photobucket.com/albums/f103/fastishott/DSC04978.jpg
http://i46.photobucket.com/albums/f103/fastishott/DSC04973.jpg
http://i46.photobucket.com/albums/f103/fastishott/DSC04975.jpg