pHEnomIC

iTrader: (14)

I am building an 8.8 rearend. I have the 8.8 and the 10 bolt that I am using. However, the 10 bolt im using has drum brakes.

Id like to leave my 10 bolt on my car together just in case I need a backup.

Do I need to take the axles off and what else do i need to do to get the backing plates off so I can use my disk brakes?

96lt1m6

iTrader: (31)

You need to open the cover remove the small bolt holding the pin, slide pin out then push one axle all the way in remove the c-clip repeat steps on other axle. slide axles out then unbolt the backing plates.