L92 cam phaser limiter install - pulled all 5 screws
05-22-2010, 06:57 PM
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jan 2010
Location: SW Florida
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
L92 cam phaser limiter install - pulled all 5 screws GM how to:
http://www.gmhightechperformance.com.../photo_21.html
I pulled all five screws on the phaser by accident. One is only supposed to go 1/2 turn and not come out. Did I wreck it?
Cam and Phaser change photos. And dont pull all 5 screws:
http://www.flickr.com/photos/41575483@N07/?saved=1
http://www.gmhightechperformance.com.../photo_21.html
I pulled all five screws on the phaser by accident. One is only supposed to go 1/2 turn and not come out. Did I wreck it?
Cam and Phaser change photos. And dont pull all 5 screws:
http://www.flickr.com/photos/41575483@N07/?saved=1
Last edited by 68Problemchild; 05-22-2010 at 09:03 PM.
05-23-2010, 08:15 AM
#2
I've been reading up on the phaser limiter for my swap, and it sounds like the last screw keeps the spring from unwinding. If you pulled them all, I don't know of anyway to rewind the spring.
Sounds like you might need to shop around for a new phaser... :-(
Sounds like you might need to shop around for a new phaser... :-(
