yoshgixxer

iTrader: (74)

i bought a used set of 317 truck heads,and they have been ported and had machine work done to them..the guy i bought em from didnt know the CC of the head..is there any way i can check the CC with some at home items??

novaflash2002

iTrader: (51)

get a piece of plexie glass drill a small hole in it. go to the cooking untinsle isle of wal-mart and get a baster the measures in cc's. put a spark plug in the head, alittle grease around the chamber and fill away.

yoshgixxer

iTrader: (74)

exactly what i was thinking! but what should i use for the liquid?? water? or good old vegetable oil? haha

novaflash2002

iTrader: (51)

water, gas, oil what ever you like

chrs1313

iTrader: (24)

I would use a solvent not water...

monte383sbc

iTrader: (15)

i have used water cut with rubbing alcohol 50/50 and a few drops of food coloring that worked for me fine

UGotBeaT

just use rubbing alcohol with nothin mixed in it...works fine.

yoshgixxer

iTrader: (74)

I used rubbing alchahol.. What a simple job that was.. I ended up with 73cc which makes sense since there is some work done in the bowle area.. Probably enough to make up for the 2 extra CC... That's ver good news cuz the guy I bought the heads from didn't know if they where ever decked