96blackz28

iTrader: (3)

Happened yesterday doing a hard 1st-3rd burnout...

Motive 4.10

Awww See Yah!

*02WS6TURK*

iTrader: (13)

*****....that sucks. So what now? New set? New rear? I got some GM 3.23's and a set of 3.42's if you want them

96blackz28

iTrader: (3)

I drove it home 35miles like that.. clunk clunk clunk, surprised it made it.

Yea I was going to get a set of richmond gears. Or if someone has a set of 4.10 gears they want to get rid of. PM me!

*02WS6TURK*

iTrader: (13)

Why Richmond?? Your best bet is going with GM if you should decide to go 4.10's again.

96lt1m6

iTrader: (31)

I feel ya bro that happened to me last month with my 4.10s!
i suggest MOTIVE gears

13lu91rS

iTrader: (1)

i sheared a richmond pinion in half, along with about half the ring.

i have gm gears now, and they are super quiet and have been good to me so far.

Theblacknightls1

iTrader: (1)

Im going with 410s also whats the best to go with as far as brand goes and how much am i looking at

*02WS6TURK*

iTrader: (13)

GM for the win...

ThumperNC24

iTrader: (1)

where can you get GM gears?

my 4.10s are broken too

*02WS6TURK*

iTrader: (13)

JawS Gear http://www.jawsgear.com/

13lu91rS

iTrader: (1)

or the dealership!

*02WS6TURK*

iTrader: (13)

Sure if you wanna get raped on prices

westtexasbuff

iTrader: (40)

Around $200 - $250 for the ring/pinion/oil/additive (don't forget this)/and installation materials (shims etc...). Get Motives or GM. I had my Motive 4.10s professionally installed and they did not whine at any speed.The guy that installed mine said that it doesn't matter what ratio, or type of gear material, if it whines, it is not set up properly. Do it right the first time, and have someone with experience do it for you.

96blackz28

iTrader: (3)

^^ Yes I had a local shop put my gears in and they whined very bad from day one. Only got about 10,000 miles out of the gears

Bob@BruteSpeed

iTrader: (16)

I sold a guy a new set of Richmond gears for his 10 bolt some years ago. I know the shop that installed his gears and they know what they are doing. I happened to be at the track when he ran it for the first time after the gear install. On the first launch it took the teeth off the gears. The 7.5 rear is just too tiny for the power of these cars. Bob

Theblacknightls1

iTrader: (1)

DAMN!!! so bad idea to put 410 in em...