Push rods?
06-02-2010, 07:47 PM
#4
On The Tree
Thread Starter
iTrader: (5)
Join Date: Jul 2009
Location: Fort Worth, TX
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
Wow I would expect this from the guys at ls1lt1. The length is what I was asking. Maybe next time ill be more specific for the simple minded out there.
06-02-2010, 07:53 PM
#6
We are pretty simple minded. I mean any retard would know what length you need. I mean its not like silly things such as deck height, head gaskets thickness, having the heads milled, etc have ANYTHING to do with it.
In short: there is no answer to your question because there are still unkown variables. And even when you gave all the variables we STILL can't tell you. You need to measure.
Get yourself a pushed length tool, and research how to properly do it.
In short: there is no answer to your question because there are still unkown variables. And even when you gave all the variables we STILL can't tell you. You need to measure.
Get yourself a pushed length tool, and research how to properly do it.
06-02-2010, 07:54 PM
#7
you'll need a length checker for that. use either an adjustable pushrod or a type of length checker that fits over your stud. either is fine.
simple minded? that hurt dude, really hurt.
simple minded? that hurt dude, really hurt.
Last edited by LSXNV; 06-02-2010 at 07:57 PM. Reason: expression of pain
Trending Topics
06-02-2010, 07:55 PM
#8
On The Tree
Thread Starter
iTrader: (5)
Join Date: Jul 2009
Location: Fort Worth, TX
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
So I can't go with what someone else might have on the same set up, I'll have to get the adjustable push rod to know for sure? If so where can I get one?
06-02-2010, 07:57 PM
#10
If you were on an original motor with stock untouched heads that's never been apart on stock lifters, you would use 7.20" pushrods. But since you're not, no one can tell you exactly what length you need, because all that cool stuff Gregrob just posted needs to be considered. Get a pushrod length checker.
06-02-2010, 08:08 PM
#11
If you were on an original motor with stock untouched heads that's never been apart on stock lifters, you would use 7.20" pushrods. But since you're not, no one can tell you exactly what length you need, because all that cool stuff Gregrob just posted needs to be considered. Get a pushrod length checker.
06-03-2010, 03:41 PM
#16
TECH Regular
Join Date: Apr 2007
Location: Kempner, TX
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=94fixerTA;13415654]So I can't go with what someone else might have on the same set up, . . . QUOTE]
No, that's one thing that's specifically said NOT to do.
Jake
My son, Ryan M. Cameron, graduated from West Point on 22 May 2010! He was commissioned as a 2nd Lieutenant and I pinned on his first pair of "Butter Bars" PROUDEST DAY OF MY LIFE!!
No, that's one thing that's specifically said NOT to do.
Jake
My son, Ryan M. Cameron, graduated from West Point on 22 May 2010! He was commissioned as a 2nd Lieutenant and I pinned on his first pair of "Butter Bars" PROUDEST DAY OF MY LIFE!!
