Hennessey V650 Pacakge numbers
06-03-2010, 02:45 PM
#1
Launching!
Thread Starter
Join Date: Jul 2004
Location: H-Town
Posts: 1,293
Likes: 0
Received 0 Likes
on
0 Posts
Hennessey V650 Pacakge numbers Wow!
Is all I can say,
I just got back from John's place to pick up the CTSV and needless to say I had a smile on my face the whole ride home. Went to pick up the car it was washed (even though it rained on the way home
) and waiting for me in the shade. The customer service provided by their new front girl, Courtney Enders was second to none. They had all documentation ready to go with dyno numbers and my extra parts wrapped up in the trunk for me.
Starting it up it purred like a kitten, few throttle blips and it sounds like it was ready to chew up the road. ( I opted for stock catback)
No check engine lights, no issues, no drone. Car honestly is the way it should have been from the factory!
The whine of the supercharger and the subtle exhaust note from the 1 7/8 headers is just perfect.
The pull from 1st to 4th is just incredible. Before you know it you are doing 140mph and the ride is smooth as ice.
If anyone is looking to modify one of these I encourage you to check out the 650V package from Hennessey.
The fit and finish, the performance and the pure badass'ness of this car is just mind blowing.
The 650V package consist of:
# The V650 Package Includes:
# • 4 inch Cold Air Induction System
# • Supercharger Pulley Upgrade
# • Engine Management Software Upgrade
# • Long Tube 1 7/8 inch Stainless Steel Headers
# • 3 inch Stainless Steel Mid Pipes
# • 3 inch Stainless Steel X-Pipe
# • High Flow Catalytic Converters
# • Intercooler Heat Exchanger System Upgrade
# • 160 Degree Thermostat
# • Hennessey Embroidered Head Rests
# • Serial Numbered Dash Plaque
# • Serial Numbered Plaque in Engine Compartment
Numbers:
Didnt dyno the car stock but here is the after.
The result:
Bought a set of lowering springs from D3 I am going to tack on and hopefully lower it down a bit to give it the stance it deserves!
If anyone has any questions regarding the package send me a pm.
Is all I can say,
I just got back from John's place to pick up the CTSV and needless to say I had a smile on my face the whole ride home. Went to pick up the car it was washed (even though it rained on the way home
) and waiting for me in the shade. The customer service provided by their new front girl, Courtney Enders was second to none. They had all documentation ready to go with dyno numbers and my extra parts wrapped up in the trunk for me.Starting it up it purred like a kitten, few throttle blips and it sounds like it was ready to chew up the road. ( I opted for stock catback)
No check engine lights, no issues, no drone. Car honestly is the way it should have been from the factory!
The whine of the supercharger and the subtle exhaust note from the 1 7/8 headers is just perfect.
The pull from 1st to 4th is just incredible. Before you know it you are doing 140mph and the ride is smooth as ice.
If anyone is looking to modify one of these I encourage you to check out the 650V package from Hennessey.
The fit and finish, the performance and the pure badass'ness of this car is just mind blowing.
The 650V package consist of:
# The V650 Package Includes:
# • 4 inch Cold Air Induction System
# • Supercharger Pulley Upgrade
# • Engine Management Software Upgrade
# • Long Tube 1 7/8 inch Stainless Steel Headers
# • 3 inch Stainless Steel Mid Pipes
# • 3 inch Stainless Steel X-Pipe
# • High Flow Catalytic Converters
# • Intercooler Heat Exchanger System Upgrade
# • 160 Degree Thermostat
# • Hennessey Embroidered Head Rests
# • Serial Numbered Dash Plaque
# • Serial Numbered Plaque in Engine Compartment
Numbers:
Didnt dyno the car stock but here is the after.
The result:
Bought a set of lowering springs from D3 I am going to tack on and hopefully lower it down a bit to give it the stance it deserves!
If anyone has any questions regarding the package send me a pm.
Trending Topics
06-04-2010, 11:20 AM
#10
Launching!
Thread Starter
Join Date: Jul 2004
Location: H-Town
Posts: 1,293
Likes: 0
Received 0 Likes
on
0 Posts
06-05-2010, 10:20 AM
#16
TECH Enthusiast
iTrader: (15)
Join Date: Nov 2006
Location: Spring,Tx
Posts: 525
Likes: 0
Received 0 Likes
on
0 Posts
06-05-2010, 03:32 PM
#17
Launching!
Thread Starter
Join Date: Jul 2004
Location: H-Town
Posts: 1,293
Likes: 0
Received 0 Likes
on
0 Posts
But worth every penny. They have done about 100 of these things, so needless to say any potential bugs are worked out. Few customers have put over 35000 miles on their V's with this package no issues whatsoever.Hard to believe they can make 30more rwhp over basically the same setup? Auto or manual?
Who did their work?
I need to call Ajay and if they still have it we need to line them up!
06-05-2010, 03:46 PM
#18
TECH Junkie
iTrader: (1)
Join Date: Oct 2002
Location: Katy, TX
Posts: 3,037
Likes: 0
Received 0 Likes
on
0 Posts
Not cheap But worth every penny. They have done about 100 of these things, so needless to say any potential bugs are worked out. Few customers have put over 35000 miles on their V's with this package no issues whatsoever.
Hard to believe they can make 30more rwhp over basically the same setup? Auto or manual?
Who did their work?
I need to call Ajay and if they still have it we need to line them up!
But worth every penny. They have done about 100 of these things, so needless to say any potential bugs are worked out. Few customers have put over 35000 miles on their V's with this package no issues whatsoever.Hard to believe they can make 30more rwhp over basically the same setup? Auto or manual?
Who did their work?
I need to call Ajay and if they still have it we need to line them up!
Not ******* your set up at all, I'm sure those head rest look killer
B
06-05-2010, 03:54 PM
#19
Launching!
Thread Starter
Join Date: Jul 2004
Location: H-Town
Posts: 1,293
Likes: 0
Received 0 Likes
on
0 Posts
I am up for an LMR vs Hennessey on the street.
My headrest look good but the badge on the back looks alot cooler.
Last edited by G-Z06; 06-05-2010 at 04:03 PM.