Looking for some part numbers.....
06-11-2010, 08:27 AM
#1
On The Tree
Thread Starter
Join Date: Apr 2009
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
Looking for some part numbers..... for front transmission seal on 2001 4l60e ls1
rear main seal on same
also, should I stick with dealer parts or would fel-pro be ok?
Also, wondering what would be easily replaceable as far as seals and wear parts as I will be having the transmission out for a bit. I don't want to dig into the internals though. thanks
rear main seal on same
also, should I stick with dealer parts or would fel-pro be ok?
Also, wondering what would be easily replaceable as far as seals and wear parts as I will be having the transmission out for a bit. I don't want to dig into the internals though. thanks
06-11-2010, 02:46 PM
#3
TECH Regular
iTrader: (8)
Join Date: Mar 2008
Location: Plain Dealing, LA
Posts: 445
Likes: 0
Received 0 Likes
on
0 Posts
The orange one? The only place I've found that is the dealer.
I've had trans shops and other places, even bulkpart give me the green o-ring. Maybe it will work, but it was originally used on the V6 transmissions with a smaller ID input shaft, so when you put the green o-ring on an LS1 input it stretches it out a little which reduces it's OD when it's on the shaft.
I've had trans shops and other places, even bulkpart give me the green o-ring. Maybe it will work, but it was originally used on the V6 transmissions with a smaller ID input shaft, so when you put the green o-ring on an LS1 input it stretches it out a little which reduces it's OD when it's on the shaft.
