Adam1203

iTrader: (5)

I have to pass a visual inspection of the car so i have to run headers with air, egr and cat. which headers are going to give me the best bang for my buck and keep that emissions. from reading posts it seems like the AS&M. but i was wondering if there was any thing else.

RamAir95TA

iTrader: (2)

Give the MACs a try too. I ran them for awhile and was pleased. Have them coated too. AS&Ms are nice but way overpriced, IMO.

Adam1203

iTrader: (5)

im most likely go with the MACs i figure by the time they wear out. the car will be old enough to not need emissions.

irocurpony8489

iTrader: (2)

most guys will say either mac or asm i found a good deal on a set mac mids seem to be the best fitting but only have 1 5/8 which if you plan to do fine if you ever what to do a heads/cam package im sure the asm 1 3/4 would be better. I believe both these mid length headers are illegal in ca

Adam1203

iTrader: (5)

oh i live in ny but im moving to Virgina.

i have a set of ebay long tubes right now. but they dont even allow for a cat. if i was staying in ny i wouldn't worry about it becuase i know where to take it to get inspected but im not to familiar with VA and there standard so i figured i run some mids for a while till i get used to the area and there inspections.

irocurpony8489

iTrader: (2)

i live in maryland i have family in va most the rural places dont even have emissions just yearly inspection so if you have to weld some bullet cats on your exsisting ory

Adam1203

iTrader: (5)

if i cant move them i may just throw them on for now and rig up a cat. im pretty sore when i asked the guy if they would hook up to a stock cat and he said yes. id be surprised is the pipe even comes out in a similar location to stock y pipe