LT1-LT4 Modifications 1993-97 Gen II Small Block V8

got some issues please help

Thread Tools
 
Search this Thread
 
Old 06-13-2010, 07:55 PM
  #1  
9 Second Club
Thread Starter
iTrader: (3)
 
transam001's Avatar
 
Join Date: Jan 2007
Posts: 221
Likes: 0
Received 1 Like on 1 Post

Default got some issues please help

i have a cc306 4000 converter 342 gears boltons. i took the car out tonight and it ran 13.7. i had a 2.48 60 foot. lol the trans wont shift 1st to second it hits the revlimiter 5-6 times then shifted the 2-3 woundn't shift until i let up. i think this may be a tuning issue. i just got the mail order tune. i think if i can get the 60 foot down to 1.7 and the trans fix the car should go low 12 or so. and input will be appriciated. thanks
Old 06-13-2010, 08:00 PM
  #2  
10 Second Club
iTrader: (3)
 
boosted LT1's Avatar
 
Join Date: Jan 2010
Location: Montgomery AL
Posts: 345
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by transam001
i have a cc306 4000 converter 342 gears boltons. i took the car out tonight and it ran 13.7. i had a 2.48 60 foot. lol the trans wont shift 1st to second it hits the revlimiter 5-6 times then shifted the 2-3 woundn't shift until i let up. i think this may be a tuning issue. i just got the mail order tune. i think if i can get the 60 foot down to 1.7 and the trans fix the car should go low 12 or so. and input will be appriciated. thanks
Sounds like you need to correct the tune. Email tuner the fix is not difficult and is usually easy to correct in the tune. Many LT1's have trouble with stalls >3200 but the fix has been known for years. Did you tellhim what stall you were using?

Good luck
Old 06-13-2010, 08:01 PM
  #3  
TECH Fanatic
iTrader: (4)
 
IronOutlaw's Avatar
 
Join Date: Feb 2008
Location: Athens, GA
Posts: 1,443
Likes: 0
Received 1 Like on 1 Post
Default

How does the trans shift under normal driving conditions? It sounds like stall wall. What year is the car and who tuned it.
Old 06-13-2010, 08:05 PM
  #4  
9 Second Club
Thread Starter
iTrader: (3)
 
transam001's Avatar
 
Join Date: Jan 2007
Posts: 221
Likes: 0
Received 1 Like on 1 Post

Default

yes it told the tuner what stall it was using. before the tune everytime i launched it it would go to fail safe mode. that is fixed. i have not talked to the tuner i will tomorrow.




All times are GMT -5. The time now is 08:55 AM.