3.90s with 26 in. m/t ?
#1
I write checks with my mouth that my ass can't cash
Thread Starter
iTrader: (7)
Join Date: Oct 2009
Posts: 948
Likes: 0
Received 0 Likes
on
0 Posts
3.90s with 26 in. m/t ?
deciding on 3.73s or 3.90 gear swap with my 26in. m/t, going to be an ss4000 stalled car next month with a built tranny and just wanting to swap in some gears while im at it, it has 3.23s in it now maybe get an extera 2 tenths out of the gear swap becuase i can do it myself
#2
LS1Tech Sponsor
iTrader: (16)
How much horsepower do you have and at what rpm do you want to be crossing the finish line at? Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
#5
Staging Lane
iTrader: (4)
Join Date: Apr 2009
Location: Connecticut
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Good question, I have the 26.0 E.T. streets and 3.90 in my 9 inch. I went to the track friday morning. Converter was not stalling for me whatsoever(3200 stall). Maybe it was the 92 degrees out. And real quick Im making a tad over 500whp with a remote turbo.
The reason I found this thread is because I didnt like the gear, and Im searching other peoples gear choices. I would love it if someone else could chime in and shed a little light the subject. Then we would both be in good shape.
The reason I found this thread is because I didnt like the gear, and Im searching other peoples gear choices. I would love it if someone else could chime in and shed a little light the subject. Then we would both be in good shape.