Header clearence on sides of collectors?
#1
TECH Resident
Thread Starter
Join Date: Dec 2005
Location: In a house
Posts: 856
Likes: 0
Received 0 Likes
on
0 Posts
Header clearence on sides of collectors?
I am mainly wondering about the drivers side header collector with a 3" collector. If you happen to know the pass side which I think has alot of clearance you can say it anyways.
I am wondering the left and right side clearance on the drivers side header collector on a 97' Z auto, the closer to that model the better.
I am wondering the left and right side clearance on the drivers side header collector on a 97' Z auto, the closer to that model the better.
#3
TECH Resident
Thread Starter
Join Date: Dec 2005
Location: In a house
Posts: 856
Likes: 0
Received 0 Likes
on
0 Posts
I am just wondering the space available to the left and the right of the drivers side collector. How much there is between it and the closest thing to the collector.
I saw one picture but it was angled and a manual trans.
The left looks fairly open but the right looks very close to the trans.
Trying to get an idea of something before I start taking things apart.
I saw one picture but it was angled and a manual trans.
The left looks fairly open but the right looks very close to the trans.
Trying to get an idea of something before I start taking things apart.
#5
Teching In
Join Date: Mar 2007
Location: Sox side of chicago
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
mine was real close to that beam so i took a 4" hole saw and put a round nothe in the beam and problem solved, just make sure you keep an eye on the fuel lines, i got the spped inc fuel line kit and ran them up the back of the engine.