FLP LVL IV Vacuum Mod Help
01-18-2004, 08:28 AM
#1
On The Tree
Thread Starter
Join Date: Oct 2002
Location: Hubert, North Carolina
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
FLP LVL IV Vacuum Mod Help Instlling the trans now and need to know where to hook the vacuum mod line. I did a search and didn't come up with anything. Went to the FLP site didn't show anything. Help greatly appreciated. Thanks, Nick
01-18-2004, 09:01 AM
#4
On The Tree
Thread Starter
Join Date: Oct 2002
Location: Hubert, North Carolina
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
I'm assuming thats the line going directly into the side of my intake. Pretty thick hose. I guess I cut in the center and splice in...? If so all the hardware is there.... BTW, Thanks.
01-18-2004, 10:24 AM
#5
LS1Tech Administrator
iTrader: (3)
Join Date: Nov 2001
Location: Schiller Park, IL Member: #317
Posts: 32,040
Likes: 0
Received 1,489 Likes
on
1,072 Posts
Originally Posted by WILWAXU
The brake vacuum tube, coming off the side of the brake vacuum booster.
Did they send you all the hardware?
Did they send you all the hardware?
01-18-2004, 07:01 PM
#6
On The Tree
Thread Starter
Join Date: Oct 2002
Location: Hubert, North Carolina
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Thanks again to both of you for the short notice help. I just got done with my test drive and the tranny is working great. Unfortunately, it started raining right as I was pulling out of my damn garage. Test run was fun but not as much fun as it could have been. *** end side was at 65mph on a wet street just isn't as much fun as it should be..... Nick
01-19-2004, 11:23 AM
#7
On The Tree
Thread Starter
Join Date: Oct 2002
Location: Hubert, North Carolina
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
I finally got my test drive on dry pavement...
Then somebody was nice enough to put his rear bumper and trailer hitch through the side of the car. What a great day.
Then somebody was nice enough to put his rear bumper and trailer hitch through the side of the car. What a great day.
Trending Topics
01-19-2004, 06:01 PM
#8
LS1Tech Administrator
iTrader: (3)
Join Date: Nov 2001
Location: Schiller Park, IL Member: #317
Posts: 32,040
Likes: 0
Received 1,489 Likes
on
1,072 Posts
Originally Posted by Leatherneck
I finally got my test drive on dry pavement...
Then somebody was nice enough to put his rear bumper and trailer hitch through the side of the car. What a great day.
Then somebody was nice enough to put his rear bumper and trailer hitch through the side of the car. What a great day.
The only good news is that once you get the cosmetics fixed up, you'll have a top notch trans already installed.
