Predictions: Cammed LS3 + 150shot with Nano
#1
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Aug 2002
Location: Dallas, TX
Posts: 1,733
Likes: 0
Received 0 Likes
on
0 Posts
Predictions: Cammed LS3 + 150shot with Nano
I'm putting a n20 outlet 150 wet plate kit on my LS3 with Nano.
Currently 487rwhp in the summer or 494rwhp in the winter.
I'm hoping for 630rwhp. Figuring 470rwhp with timing out +150+nano.
Currently 487rwhp in the summer or 494rwhp in the winter.
I'm hoping for 630rwhp. Figuring 470rwhp with timing out +150+nano.
#6
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Aug 2002
Location: Dallas, TX
Posts: 1,733
Likes: 0
Received 0 Likes
on
0 Posts
LOL yeah you should beat me motor to bottle. What are you making on motor and what shot are you going to do?
As a benchmark a buddy of mine with a cam/geared/sprayed t/a is about 1/2 car to 1 car behind me on motor from a roll. He's trapping 121 I think.
As a benchmark a buddy of mine with a cam/geared/sprayed t/a is about 1/2 car to 1 car behind me on motor from a roll. He's trapping 121 I think.
Trending Topics
#8
On The Tree
iTrader: (2)
Join Date: Aug 2009
Location: Mesquite TX
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
I gotta say this though, we ran from my worst roll at 40-45. I think from my roll at 20 you'd get me but definately not by that much. With a bottle I think I would get you motor but just by a little.
#11
Staging Lane
iTrader: (3)
Join Date: Feb 2009
Location: Texas must secede!!!
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
I predict... Lots of parts and pieces scattered all over the ground, oil all over the car, nice looking view of the correctly built car leaving, and a serious draft on the account.
Last edited by 1c62nv; 07-11-2010 at 11:31 AM. Reason: Hurt his feelings :)
#14
11 Second Club
iTrader: (20)
Join Date: Oct 2006
Location: Princeton, Texas
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
You need to get that kit on there Insom....Bottle to bottle we should be a good run!
I'd say your 630rwhp hopes are pretty accurate as long as you don't have to pull too much timing on spray. I've lost as much as 40rwhp on motor when I've pulled 6-7* timing....
You won't have to pull that much as long as your on top of things....
I'd say your 630rwhp hopes are pretty accurate as long as you don't have to pull too much timing on spray. I've lost as much as 40rwhp on motor when I've pulled 6-7* timing....
You won't have to pull that much as long as your on top of things....
#15
TECH Enthusiast
iTrader: (5)
Join Date: Jun 2005
Location: Dallas, Texas
Posts: 687
Likes: 0
Received 0 Likes
on
0 Posts
You would need more than 16 posts more anyone to take that seriously. A lot of people on this forum have sprayed these motors a very long time with great success. I sprayed 150 on my LS1 for over two years and it was begging for more.
#17
On The Tree
Join Date: Jul 2008
Location: houston, tx
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
my buddy made 505 to the wheelz in an 08 ls3 vette with cam, tune, springs and full exhaust an he put 150 shot an made 630 so you should be close i would think!!!
#19
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Aug 2002
Location: Dallas, TX
Posts: 1,733
Likes: 0
Received 0 Likes
on
0 Posts
You need to get that kit on there Insom....Bottle to bottle we should be a good run!
I'd say your 630rwhp hopes are pretty accurate as long as you don't have to pull too much timing on spray. I've lost as much as 40rwhp on motor when I've pulled 6-7* timing....
You won't have to pull that much as long as your on top of things....
I'd say your 630rwhp hopes are pretty accurate as long as you don't have to pull too much timing on spray. I've lost as much as 40rwhp on motor when I've pulled 6-7* timing....
You won't have to pull that much as long as your on top of things....
Did you finish tuning it?
Last edited by InsomZ; 07-11-2010 at 11:04 AM.