New cam sound clip
#1
9 Second Club
Thread Starter
iTrader: (21)
Join Date: Mar 2008
Location: League City, Texas
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
New cam sound clip
Just had Matt at 510 Race Engineering install a comp XER281HR in my car. This was the initial start up on the factory tune. As you can hear, it wasn't easy getting it to run. I'll post another vid tomorrow after the tune. It was recorded with an iphone.
http://www.youtube.com/watch?v=QRdP7ByRKXs
After tune- same iphone
http://www.youtube.com/watch?v=7wc7k7R13HA
http://www.youtube.com/watch?v=QRdP7ByRKXs
After tune- same iphone
http://www.youtube.com/watch?v=7wc7k7R13HA
Last edited by Slash8915; 07-16-2010 at 08:15 PM.
#3
9 Second Club
Thread Starter
iTrader: (21)
Join Date: Mar 2008
Location: League City, Texas
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
Lol, I'll get a recording after the tune today. I'll use my HD2 which has significantly better quality.
It might have been having problems Idling because we were using the stock LS1 injectors. I have some 42#ers, but I wanted to wait to have them tuned into the PCM. Didn't want to foul out the spark plugs.
It might have been having problems Idling because we were using the stock LS1 injectors. I have some 42#ers, but I wanted to wait to have them tuned into the PCM. Didn't want to foul out the spark plugs.
#6
TECH Enthusiast
iTrader: (19)
Join Date: Apr 2006
Location: Morris, IL
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
Does sound pissed off!
I'm in the process of installing the same cam but with a Super Vic intake so should in theory slightly better intake flow. Hope I can even get mine to run without the MAF...
I'm in the process of installing the same cam but with a Super Vic intake so should in theory slightly better intake flow. Hope I can even get mine to run without the MAF...