408-D1SC, tuning questions
#1
Teching In
Thread Starter
Join Date: Nov 2009
Location: Oklahoma
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
408-D1SC, tuning questions
this may be a broad question but im about to shove my supercharged lq4 in my 2000 camaro, and i dont know what to do about computer/tuning. do i just put the motor in and haul it to a tuning shop or do i need to send my computer off somewhere?
#2
9 Second Club
iTrader: (2)
Join Date: Jul 2002
Location: on the dyno tuning in MD
Posts: 2,583
Likes: 0
Received 1 Like
on
1 Post
Is it a new engine? If so, you need to break it in before tuning it under full boost... to do that, you need a base tune. Is the tuning shop nearby? The best way to do it is to get them to do a base tune on it, then you can make sure everything is working properly and broken in before you go for the full deal. Whatever you do, if you have new injectors that the PCM hasn't been tuned for, don't start the car! Big injectors on a small injector tune will wash rings out very quickly!!
#5
LS1Tech Sponsor
iTrader: (16)
http://www.fastchip.com/
Ed can give you a tune to get the car up and running, then you can take it to him for a complete dyno tune. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website