Gen 5 Camaro Internal Engine Tech - Livernois KB 3.6 LC Stroker 2010 Camaro Build

Earlier this year, we built an L99 Camaro for a customer that consisted of a Livernois 419 stroker longblock, built A6, and Magnacharger 2300 S/C.

As far as we know it's the quickest 2010 Camaro on 20's and the quickest Magnacharged 2010 Camaro.

The car weighed 4,130 with me in it and went a best of 10.44 @ 135 mph on widened factory 20's and Nitto DR's.

The customer wanted more, so we are currently installing a Kenne Bell 3.6L liquid cooled S/C with our custom 10-rib kit and Alky Controls methanol kit. I can't wait to see what kind of numbers it puts down. It would be impressive to go 9's on 20's :D

http://i540.photobucket.com/albums/gg324/LivernoisMotorsports/DSC_14921.jpg

http://i540.photobucket.com/albums/gg324/LivernoisMotorsports/DSC_1501.jpg

Alky Controls Pump

http://i540.photobucket.com/albums/gg324/LivernoisMotorsports/DSC_1524.jpg

Livernois Motorsports wiring for the meth kit

http://i540.photobucket.com/albums/gg324/LivernoisMotorsports/DSC_1522.jpg

10.44 Video

Video (http://www.youtube.com/watch?v=K6QUBn1PpS8&fmt=22)

Regards,

Rick LeBlanc
Livernois Motorsports

how are yall controlling the iats? I have a 2.6kb c6 and with 11psi only put down a lil over 530 down.

Awesome resluts. What kind of lbs of boost and compression does the car have and what kind of boost will you run on the KB setup to see the differences.

how are yall controlling the iats? I have a 2.6kb c6 and with 11psi only put down a lil over 530 down.

The LC KB should help with the IAT's.

Awesome resluts. What kind of lbs of boost and compression does the car have and what kind of boost will you run on the KB setup to see the differences.

Thank you! It's 10.4:1 and we plan on running 18-20 lbs.

The Maggie made around 15-16 lbs.

-Rick

That’s a sick build…Good luck with everything, I look forward to seeing the results. :cheers:

That’s a sick build…Good luck with everything, I look forward to seeing the results. :cheers:

I'm looking forward to the results too... from this one and a slightly crazier one which is also in process and can be seen here (http://www.ls1tech.com/forums/multimedia-exchange/1311491-livernois-lsx-kenne-bell-3-6-lc-2010-camaro-build.html)

- Rick

Hurry!