New, Track and Trade
08-06-2010, 03:20 AM
#1
Teching In
Thread Starter
Join Date: Aug 2010
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
New, Track and Trade Hey guys im very new to the forums and ive been into turbos a bit now. I was wondering what 01 z28 would run in a 1/4 mile. I dont know va's elevation and all that but i also know that this camaro has had headers, exhuast, some type of fuel work, and some type of chip and/or tune(maybe both?) But im driving an 08 csrt4 turbo now and i cant get outta the 14s class with it so i figured that these things would do the job. Found a 01 z(the one talked about above) with onlly 21k miles on it. And im thinking about trading in my cali for it. Give me feed back on all the questions guys!
08-06-2010, 04:04 AM
#2
TECH Resident
Join Date: Dec 2004
Location: K-W, Ontario
Posts: 845
Likes: 0
Received 0 Likes
on
0 Posts
A stock 01 Z28 will run mid to high 13's at about 108 MPH.
I'm not sure what you mean by a 'chip' as these PCM's can be flash programmed.
With the mods you listed, that Z28 should be in the low 13's and possibly
high 12's. If you need more specifics, you'll have to provide more information
about the modifications, and ideally a dyno graph.
I'm not sure what you mean by a 'chip' as these PCM's can be flash programmed.
With the mods you listed, that Z28 should be in the low 13's and possibly
high 12's. If you need more specifics, you'll have to provide more information
about the modifications, and ideally a dyno graph.
08-06-2010, 04:10 AM
#3
Teching In
Thread Starter
Join Date: Aug 2010
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
A stock 01 Z28 will run mid to high 13's at about 108 MPH.
I'm not sure what you mean by a 'chip' as these PCM's can be flash programmed.
With the mods you listed, that Z28 should be in the low 13's and possibly
high 12's. If you need more specifics, you'll have to provide more information
about the modifications, and ideally a dyno graph.
I'm not sure what you mean by a 'chip' as these PCM's can be flash programmed.
With the mods you listed, that Z28 should be in the low 13's and possibly
high 12's. If you need more specifics, you'll have to provide more information
about the modifications, and ideally a dyno graph.
