Valkyn

iTrader: (8)

I just ordered my Moser 9" and went with the long 1/2" wheel studs. I'm looking for some lug nuts that will fit the studs as well as fitting my Weld-Star R/T rims (and the stockers).

Would these lugs from summit work and pass tech at the track?
http://www.summitracing.com/parts/WL...1456/?rtype=10

ryarbrough

iTrader: (18)

Those will definately not fit your stock wheels. They should work and pass tech with the new rims.

Valkyn

iTrader: (8)

Are there any lug nuts that will fit with the stock rims?

ryarbrough

iTrader: (18)

No.... Those wheels take a shank lug and the stock wheels take a conical/acorn style seat.

Valkyn

iTrader: (8)

I just mean a separate set of lug nuts that I could use on the stock wheels.

Valkyn

iTrader: (8)

Anyone? What type of lug nuts do I need to run the stock rims on the 1/2" studs?

wheelczar

I would run open end acorn lug nuts. This way the length of the stud would not matter.

Valkyn

iTrader: (8)

Do the stock rims take 60* conical seat lug nuts?

LSXFORMULA99

iTrader: (12)

just use the stock style open lug nut but in 1/2 in. thats what i did with my 12bolt and those wheels. ur local parts store should have them.

Leedogg

iTrader: (2)

What they said-

Personally- i am going this route.....this style- but from the local A/Z.

http://www.summitracing.com/parts/GOR-90087/