Trouble with PCM
08-19-2010, 04:21 AM
#1
Staging Lane
Thread Starter
Join Date: Dec 2007
Location: United Kingdom
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Trouble with PCM Hi guys,
I hope someone can help me with a very strange problem.
My build is only missing a tune.
Trouble is, the shop that is trying to remap my PCM are telling me that it wont accept a full tune (a modified map) in one go.
They are having to program the PCM by adjusting one section at a time. This is obviously time consuming for them, and a bit worrying for me.
They are using my JET DST tuning kit.
I have tried a couple of email tunes (one would not go in, the other was not satisfactory).
Any help or advice would be appreciated. TIA.....
I hope someone can help me with a very strange problem.
My build is only missing a tune.
Trouble is, the shop that is trying to remap my PCM are telling me that it wont accept a full tune (a modified map) in one go.
They are having to program the PCM by adjusting one section at a time. This is obviously time consuming for them, and a bit worrying for me.
They are using my JET DST tuning kit.
I have tried a couple of email tunes (one would not go in, the other was not satisfactory).
Any help or advice would be appreciated. TIA.....
