1.75 rockers
#3
TECH Enthusiast
iTrader: (12)
Join Date: Nov 2008
Location: Long Island, NY
Posts: 590
Likes: 0
Received 0 Likes
on
0 Posts
Well that would put that cam at about .598 lift. found this using search feature:
"I run a 232/234 .595 .598 112 LSA cam with 62cc 243's safely"
Since his heads are milled about 16-18 thousandths to get to 62cc, I would think you would be fine but still should check your PTV before startup since it is getting close.
"I run a 232/234 .595 .598 112 LSA cam with 62cc 243's safely"
Since his heads are milled about 16-18 thousandths to get to 62cc, I would think you would be fine but still should check your PTV before startup since it is getting close.
Last edited by camz28arro; 08-28-2010 at 10:40 PM.