Turbo cam
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Feb 2009
Location: England, UK
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Turbo cam
I am sorry if this is in the wrong section, i wasnt sure if this should go in the fi section.
Well anyway, i am from the uk and drive a 2004 vauxhall monaro, LS1, M6.
I have got most of an aps twin turbo kit to fit, just need to sort out fuel and intercooler.
But anyway i have been offered a cam at a very good price and ijust wanted to know if it would work well in a twin turbo setup.
The cam specs are eps 224/230 116lsa -2 degrees overlap .597 .600 lift.
The cam needs to be emissions legal.
Would a reverse split cam better suit my needs than the above cam?
I am stock bottom end for now, but will fit forged pistons and rods at a later date.
Thankyou
Well anyway, i am from the uk and drive a 2004 vauxhall monaro, LS1, M6.
I have got most of an aps twin turbo kit to fit, just need to sort out fuel and intercooler.
But anyway i have been offered a cam at a very good price and ijust wanted to know if it would work well in a twin turbo setup.
The cam specs are eps 224/230 116lsa -2 degrees overlap .597 .600 lift.
The cam needs to be emissions legal.
Would a reverse split cam better suit my needs than the above cam?
I am stock bottom end for now, but will fit forged pistons and rods at a later date.
Thankyou
#2
ЯєŧąяĐ Єl¡m¡иąŧøя ™
iTrader: (18)
I am sorry if this is in the wrong section, i wasnt sure if this should go in the fi section.
Well anyway, i am from the uk and drive a 2004 vauxhall monaro, LS1, M6.
I have got most of an aps twin turbo kit to fit, just need to sort out fuel and intercooler.
But anyway i have been offered a cam at a very good price and ijust wanted to know if it would work well in a twin turbo setup.
The cam specs are eps 224/230 116lsa -2 degrees overlap .597 .600 lift.
The cam needs to be emissions legal.
Would a reverse split cam better suit my needs than the above cam?
I am stock bottom end for now, but will fit forged pistons and rods at a later date.
Thankyou
Well anyway, i am from the uk and drive a 2004 vauxhall monaro, LS1, M6.
I have got most of an aps twin turbo kit to fit, just need to sort out fuel and intercooler.
But anyway i have been offered a cam at a very good price and ijust wanted to know if it would work well in a twin turbo setup.
The cam specs are eps 224/230 116lsa -2 degrees overlap .597 .600 lift.
The cam needs to be emissions legal.
Would a reverse split cam better suit my needs than the above cam?
I am stock bottom end for now, but will fit forged pistons and rods at a later date.
Thankyou