Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Back to the Future build shots, specs

Thread Tools
 
Search this Thread
 
Old 09-07-2010, 03:32 PM
  #1  
LS1 Tech Administrator
Thread Starter
iTrader: (14)
 
Patrick G's Avatar
 
Join Date: Nov 2001
Location: Victoria, TX
Posts: 8,244
Likes: 0
Received 31 Likes on 27 Posts

Default Back to the Future build shots, specs

Here are some shots of my AFR 230 v2 heads. These have the upgraded 8019 dual valve springs and 85 gram hollow stem intake valves.
Attached Thumbnails Back to the Future build shots, specs-dsc01942.jpg   Back to the Future build shots, specs-dsc01938.jpg   Back to the Future build shots, specs-dsc01940.jpg   Back to the Future build shots, specs-dsc01941.jpg  
__________________

2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
Old 09-07-2010, 03:39 PM
  #2  
LS1 Tech Administrator
Thread Starter
iTrader: (14)
 
Patrick G's Avatar
 
Join Date: Nov 2001
Location: Victoria, TX
Posts: 8,244
Likes: 0
Received 31 Likes on 27 Posts

Default

Here are some shots of the Tony Mamo ported FAST 102 intake. As you can see, the manifold currently runs the stock LS2 throttle body. A Nick Williams 102 TB is going to be tested soon.

Head flow numbers:
Lift Int. Exh.
.200 166 131
.300 234 189
.400 285 229
.500 323 246
.550 330 251
.600 333 255
.650 334 260

These were the flow numbers in .045" milled 65cc form. Static compression of the 6.0L engine is 11.0:1.

Cam specs: Comp LSL 231/231 .617/.617" 114LSA +2 advance.

Cloyes single roller (IWIS/ aka C5R) chain.
Attached Thumbnails Back to the Future build shots, specs-dsc01943.jpg   Back to the Future build shots, specs-dsc01944.jpg   Back to the Future build shots, specs-dsc01937.jpg   Back to the Future build shots, specs-dsc01945.jpg  
__________________

2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
Old 09-07-2010, 03:42 PM
  #3  
12 Second Club
iTrader: (13)
 
*02WS6TURK*'s Avatar
 
Join Date: Apr 2010
Location: Oregon Grown
Posts: 1,627
Likes: 0
Received 1 Like on 1 Post
Default

Great looking pieces! Is this your build or someone else?

BTW you don't know my screen name, but we have emailed one another and you spec'd me out a camshaft for my set up. Wanted to thank you for the help. Should be seeing it in the mail soon.
Old 09-12-2010, 01:17 PM
  #4  
Flow Wizard
iTrader: (13)
 
Tony Mamo @ AFR's Avatar
 
Join Date: Feb 2004
Posts: 2,197
Likes: 0
Received 5 Likes on 5 Posts

Default

Looking good Pat....

I was thinking you would be posting pics at some point and didn't run across this thread until this morning.

Looking forward to more refinement on this combination to see if we can get it over 510 and perhaps 500 in full street trim (thru the full exhaust etc.).

Cheers,
Tony



Quick Reply: Back to the Future build shots, specs



All times are GMT -5. The time now is 05:58 AM.