Hooker
09-14-2010, 01:01 PM
#1
TECH Fanatic
Thread Starter
iTrader: (2)
Join Date: Feb 2004
Location: rosemount,mn/windsor locks,ct
Posts: 1,112
Likes: 0
Received 0 Likes
on
0 Posts
Hooker I am looking at getting either a set of kooks 1&3/4 or Hooker Stainless 1&3/4 headers. I Know that the hookers are about $300 cheaper,how is the quality/fitment? Anyone else have experience with the hooker stainless headers??
TIA
TIA
09-19-2010, 08:55 AM
#3
Teching In
Join Date: Jul 2009
Location: Bates City, MO
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
I have the hookers on my car and they fit great. They do just barely touch on the driver side subframe. I just cut off a small 1/8th inch sliver from the subframe and it's fine now.
I also have the ORY from hooker and it SUCKS. The factory seam in the pipe was split and I had to weld it in several places also where the two 3" pipes meet and are welded together; the hole between the two on the inside was only about 1.5"
Here is a link to all the pics
http://s212.photobucket.com/albums/c...%20Trans%20Am/
I also have the ORY from hooker and it SUCKS. The factory seam in the pipe was split and I had to weld it in several places also where the two 3" pipes meet and are welded together; the hole between the two on the inside was only about 1.5"
Here is a link to all the pics
http://s212.photobucket.com/albums/c...%20Trans%20Am/