96silverram

iTrader: (12)

Does anybody know if the "Chris1313 Ram Air mod" has been done by anyone with a 96/97 WS6 Ram Air car? If anyone knows of a LT1 WS6 ram air car that has done this mod please direct me to it. I'm seriously considering this if I don't have to hack up my car. I would want to keep A/C so I guess this would be the A/C version of the "chris1313 RA".

hitmanws6

iTrader: (20)

There are a few on here, I believe Larry at speed inc has it. You obviously need the lid conversion and to cut your radiator support

fergymoto

iTrader: (129)

I'd just stick to the factory ram air setup with a K&N filter. It works good.

AChotrod

iTrader: (17)

I want to go wit the chrs1313 set up but not sure if it will clear a WS6 hood without hacking it up. Every single car that has it done has gained with it.

96silverram

iTrader: (12)

I would only do it if I could keep A/C and no hacking at all of my car.

hitmanws6

iTrader: (20)

You can do the lid conversion with no hacking, but you will have to cut the radiator support to install the ram air

Ocala93TA

iTrader: (9)

I didnt cut my support went right on and fit under my slp hood no problem

96silverram

iTrader: (12)

Really, can you provide me some pics of your setup? I would really like to see how this fits on a 96/97 LT1 Ram Air car. There seems to be a lack of good write-ups or pics for these particular cars.


Do I just purchase a LS1 factory radiator cover and the LS1 lid of choice (I was actually thinking about the clear lid).

defaultexistence

iTrader: (11)

look this over for a informative write up...
IMO an OEM RamAir is hard to beat...the money could be better spent

https://ls1tech.com/forums/lt1-lt4-m...mair-hood.html

speed_demon24

iTrader: (6)

The stock scoops are too far back and too low to provide much of a benefit.

96silverram

iTrader: (12)

That is what I've been thinking ever since I owned this car. I'm willing to bet that my car would pick up at least a 1/10th with the 1313 RA mod. If it does what most guys are saying it would be more like 2/10th and almost 2 mph. I'm not trying to get ahead of myself, but this mod really interest me. Does anyone know where I can get a mint LS1 (LID & Lower)?

roadtrip120

iTrader: (29)

I have a mint ls1 lower, I never used it for my setup.Pm me if you wish to purchase it