LQ4 DBW on LS6 Manifold
10-03-2010, 12:18 PM
#1
Staging Lane
Thread Starter
Join Date: Apr 2008
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
LQ4 DBW on LS6 Manifold I have a 2007 lq4 with a drive by wire throttle body on the stock truck intake. Will this same throttle body bolt up to a LS6 intake? I am going to need the hood clearance, but would like to keep the DBW. It's going in a 67 camaro. Thought I better figure it out before I send the harness out to speartech to get reworked. Also, will the stock injectors work on the LS6?
10-15-2010, 09:37 AM
#3
Teching In
iTrader: (1)
Join Date: Jun 2010
Location: Lebanon, IL
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
As far as i know the dbw fits directly onto the ls6 intake. as far as the injectors, they will need spacers. also the injectors will need new pigtails to be wired into the harness.
