Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

!air little tube lookin piece

Thread Tools
 
Search this Thread
 
Old 10-09-2010, 02:27 PM
  #1  
Staging Lane
Thread Starter
 
Frogger's Avatar
 
Join Date: Feb 2010
Posts: 96
Likes: 0
Received 0 Likes on 0 Posts
Default !air little tube lookin piece

So after i removed the air system on my z, i got to the end and found a little tube. one end goes to the saucer thing and the other to a sensor lookin box. what do i do with this? its runs fine with it just hanging there. should i plug the end with a q tip or sumthin?

oh and i did look all over here. thats how i found out that the late 00-02 air was different than the write up in this forum for a 98-early 00 air. i didnt realize this until i started pulling on the hoses behind the manifold and found the alien carrying saucer on a bracket that was bolted to the back of the drivers side head.

btw still no ses light....
Old 10-09-2010, 02:32 PM
  #2  
On The Tree
 
FUH Q's Avatar
 
Join Date: Oct 2008
Location: Wylie, TX
Posts: 194
Likes: 0
Received 0 Likes on 0 Posts

Default

https://ls1tech.com/forums/generatio...ed-please.html
Old 10-10-2010, 09:16 AM
  #3  
Staging Lane
Thread Starter
 
Frogger's Avatar
 
Join Date: Feb 2010
Posts: 96
Likes: 0
Received 0 Likes on 0 Posts
Default

appreciate it! we dont wanna leave any hoses or wires loose on our super computer controlled ls's
Old 10-10-2010, 05:32 PM
  #4  
On The Tree
 
FUH Q's Avatar
 
Join Date: Oct 2008
Location: Wylie, TX
Posts: 194
Likes: 0
Received 0 Likes on 0 Posts

Default

No problem. I'm surprised this isn't discussed more




All times are GMT -5. The time now is 08:04 AM.