Gen 5 Camaro External Bolt-On Tech - 61hp/24tq gain,cam only in A6 car



PDA

View Full Version : 61hp/24tq gain,cam only in A6 car

Slowhawk
10-19-2010, 03:17 PM
This is our shop car. It's a 2011 2SS with an A6 tranny.

Mods before Cam are ARH 2" headers and there #' dual exhaust, Airad cold air,160 t-stat.

Parts added - AFM/DOD delete with new lifters,3 bolt cam sprocket, oil pump,new covers, Our custom stage 1 cam 2xx/23x and patriot extreme springs. These are the onlt parts changed,with full tuning before/after.

Car is idling at 650rpm on the stock converter. Cam was picked to compliment the future Kenne Bell 2.8L blower.

Thanks
Don

Wnts2Go10O
10-19-2010, 04:58 PM
This is our shop car. It's a 2011 2SS with an A6 tranny.

Mods before Cam are ARH 2" headers and there #' dual exhaust, Airad cold air,160 t-stat.

Parts added - AFM/DOD delete with new lifters,3 bolt cam sprocket, oil pump,new covers, Our custom stage 1 cam 2xx/23x and patriot extreme springs. These are the onlt parts changed,with full tuning before/after.

Car is idling at 650rpm on the stock converter. Cam was picked to compliment the future Kenne Bell 2.8L blower.

Thanks
Don
3 foot exhaust?!:rock:
Bill Bowling
10-22-2010, 07:56 PM
What were the numbers stock?

I am getting a 2011 2SS/RS L99.

Bill

Slowhawk
10-25-2010, 08:35 AM
What were the numbers stock?

I am getting a 2011 2SS/RS L99.

Bill

Stock vs mods
silver2010
11-02-2010, 03:25 PM
Slowhawk, are you going to a higher stall converter after the KB install. What are you doing as far as the trans tune. Great numbers for the cam!
Slowhawk
11-03-2010, 09:47 AM
The stall will be first.The tune will need time for the trans.