Drag Racing Results - 1st time at the track with the camaro

Went to Etown last night (took 3.5hrs to get there because of a 14 car fatal accident on south jersey tpke). This is the 2nd time I've driven a car at Etown, 1st car was my srt-4 which just completely failed. This car was a good 1000000000 times better to drive on a track lol. I still have a lot of stuff to learn and work on.



I really need to work on my launches and need a shift light to get my shifts down pat.

1st run I launched like a panzy and revv'd 2 or 3rd out (or both can't remember)

2nd run I launched much better but spun and shifted early

3rd run I launched like shit again but shifted better


Car 701 (left lane each time)




http://img264.imageshack.us/img264/1542/etown102010.jpg (http://img264.imageshack.us/i/etown102010.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)



http://www.youtube.com/watch?v=U08eSbr-16U

http://www.youtube.com/watch?v=dZs18TLAC0Y

http://www.youtube.com/watch?v=D1y32qH__DU

What mods are done? Looks like a solid 12sec car once you get the 60ft down.

Get you some good sticky tires and get that 60' down, and you will be good to go.

nice man, saw a bunch of mustangs on trailors on the deegan leaving work (backed up off the cross bronx)
I need to fix my pos and hit the track before it closes.

What mods are done? Looks like a solid 12sec car once you get the 60ft down.

Thanks :)

TSP PRC Stage 1 LS6 heads 61cc w/ PRC dual springs .650 lift
Patriot Performance 225/229 .580/.590 114+4 LSA
LS2 Timing Chain
7.4 hardened push rods
MTI Clear lid
LPP Stainless Steel Long Tubes
lpp true duals
ported/bump stop modded tb
ls6 intake (came stock)

This past saturday I dyno'd the car and it put out 415whp 399wtq

Get you some good sticky tires and get that 60' down, and you will be good to go.


Definitely

nice man, saw a bunch of mustangs on trailors on the deegan leaving work (backed up off the cross bronx)
I need to fix my pos and hit the track before it closes.


haha thanks paul. Yeah the turnpike had a 14 car fatal accident and was backed up for 6 hours. We drove around for 3.5 hours to get to etown haha

Yeah, with those mods you should be running quite a bit faster than what you did. A lil practice will get you there. Nice job.

Yeah, with those mods you should be running quite a bit faster than what you did. A lil practice will get you there. Nice job.

Thanks, yeah I have some stuff to work on. More seat time will net be a better time

Congrats on your 1st run !! Work on that 60ft and youll be good to go !! Maybe Ill see ya there soon . :D

Congrats on your 1st run !! Work on that 60ft and youll be good to go !! Maybe Ill see ya there soon . :D



:nod: Should hopefully be there again soon

So I just found out my rev limiter is 6700 and I was shifting at 6100 LOL I have a lot more left then I actually thought

So I just found out my rev limiter is 6700 and I was shifting at 6100 LOL I have a lot more left then I actually thought

Yikes !! That is a lot more .. Time to go back !!:drive:

Well that would explain why you're trapping the same as brian did with that car with the stock heads/cam and less exhaust lol.

So I just found out my rev limiter is 6700 and I was shifting at 6100 LOL I have a lot more left then I actually thought

Wow!!! Man, take it back out and report back to us :D

Man you need some practice. Street tires and a 6 speed will not get you where you should be. You've got 11 second power, and a 13 second timeslip.

Yikes !! That is a lot more .. Time to go back !!:drive:

Definitely will be :)

Well that would explain why you're trapping the same as brian did with that car with the stock heads/cam and less exhaust lol.

:rofl:

Wow!!! Man, take it back out and report back to us :D

Hopefully soon

Man you need some practice. Street tires and a 6 speed will not get you where you should be. You've got 11 second power, and a 13 second timeslip.

Yeah definitely need some more seat time. I'm also going to be getting a ORY and just dumping it before the axle. Right now I have the true duals with strano springs but had to put a 1.5" spacer under the rear springs. Hopefully when I get the new ORY I can re-lower my car.