12 Second Club - Got It!
WS6SP33D
10-23-2010, 12:05 AM
After running consistent 13.0X all night i pretty much gave up, parked the car and was getting ready to leave. Temp was great around 45 degrees, drove my buddies car and decided after letting mine cool down i would try one more time and i'll be damned 12.97 @ 106 i think thats good considering mods. what you guys think?
z99ls1
10-23-2010, 12:47 AM
Cool, that is very similar to my times. Your elevation is about 1000ft lower than mine and your temps were a little better, but I also have a few more mods so it looks like you right about where you should be. Congrats on getting 12's!
z99ls1
10-23-2010, 12:48 AM
Also whats your 60ft with the lowering kit? What tires you have on it?
1998flamedCamaro
10-23-2010, 08:42 AM
Good job Ace. Can you pm me how the bluecat tune turned out?
WS6SP33D
10-23-2010, 10:44 AM
Thanks 60' was 2.01, stock wheels with street tires
WS6SP33D
10-23-2010, 10:53 AM
Pm sent.
times were
60' 2.01
1/8 8.414 @ 85.126
1/4 12.978 @ 106.245
dee99gt
10-23-2010, 04:10 PM
nice run... def could improve the 60ft time, but mines not much better either :(
WS6SP33D
10-23-2010, 04:52 PM
Thanks, I agree 60' needs improvement but i dont see it with these tires
1998flamedCamaro
10-23-2010, 05:24 PM
What kind of tires are u running? I cut a 1.85 with a 245/55/16 goodyear eagles last night. I put the tire pressure down to 23 psi and foot braked it on the line to about 1700. Try lowering the rear tire pressure.
WS6SP33D
10-23-2010, 05:49 PM
fusions, I didnt have a gauge for pressure i was spinning bad out the hole next time i will be more prepared
dee99gt
10-23-2010, 09:13 PM
What kind of tires are u running? I cut a 1.85 with a 245/55/16 goodyear eagles last night. I put the tire pressure down to 23 psi and foot braked it on the line to about 1700. Try lowering the rear tire pressure.
I did that but lowered mine to 17psi on MT's and I spun like crazy and cut a 2.2 60 ft.. :bang:
WS6SP33D
10-24-2010, 01:16 PM
yeah i need to get the 60 down, three times to track and hasent got below 2.01
z99ls1
10-24-2010, 02:25 PM
Yea honestly 2 flat for a 60 on a stock stall is prob as good as it gets.
WS6SP33D
10-24-2010, 05:11 PM
Thats what i was thinkin
WS6SP33D
10-24-2010, 10:44 PM
12 second club?
kinglt-1
10-25-2010, 10:31 AM
Yea honestly 2 flat for a 60 on a stock stall is prob as good as it gets.
there have been a few hit 1.8's with the stock stall... put a better tire on it an you will see!
WS6SP33D
10-25-2010, 01:02 PM
Really? 1.8 with stock stall is good. Using a DR?
kinglt-1
10-25-2010, 01:38 PM
yessir!
Edit* I do recall one guy on this site getting a 1.78 with a stock stall, but I don't remeber his screen name.
WS6SP33D
10-25-2010, 03:28 PM
Hell yeah
1Bad97WS-6
10-25-2010, 08:37 PM
Congrats man.. I went 13.23@106.11 with a 2.03 with stock stall/273s/stock wheels and tires. I have the same mph but a little slower time.I don't have LT's/ORY on butI do have them with a stall and 373 gears and DR's..
WS6SP33D
10-25-2010, 09:51 PM
Thanks man, prob could of done little better but im still running stock lid and ls1 intake hell if you do lt's,ory,stall 3:73's and dr's with a tune you'll prob hit low 12's good luck
1Bad97WS-6
10-25-2010, 10:07 PM
Thanks man, prob could of done little better but im still running stock lid and ls1 intake hell if you do lt's,ory,stall 3:73's and dr's with a tune you'll prob hit low 12's good luck
Thanks Thats what I was hoping for..I have everything but been to lazy to put them parts on..lol
WS6SP33D
10-25-2010, 10:24 PM
yeah i was dreding the headers and ory but it wasnt bad at all, just hate the way the y hits the floor
1Bad97WS-6
10-25-2010, 10:29 PM
might need to adjust the Y. I had the dealership put a new cat onmy car while it was still under warrenty I thought they might of broke a motor while they drove it 20+ miles while having it. But they said they just adjusted the Y/exhaust or put poly motor mounts on your car.. Your car have high mileage
WS6SP33D
10-25-2010, 10:54 PM
yeah everyone says you have to do motormounts anytime you use a pacesetter ory. theres really no way to adjust the slipover.
1Bad97WS-6
10-26-2010, 05:03 PM
yeah everyone says you have to do motormounts anytime you use a pacesetter ory. theres really no way to adjust the slipover.
ok I went with the 3" TSP with ceramic coated Pacesetter LT's.
WS6SP33D
10-26-2010, 05:32 PM
cool let me know how it fits
1Bad97WS-6
10-26-2010, 05:49 PM
Ok sure will..
1998flamedCamaro
10-26-2010, 07:14 PM
yessir!
Edit* I do recall one guy on this site getting a 1.78 with a stock stall, but I don't remeber his screen name.
I got a 1.85 60' just last friday on stock stall, goodyear eagle street tires (23 psi), stock 3.23's.
I ran 7 times that night. The first five the 60' was 2.0x
I know everyone says not to do a burnout on street tires but I did a burnout on the last two runs and got a 1.9x then a 1.85 60'.
WS6SP33D
10-26-2010, 07:55 PM
i always do a small burnout just to heat up the tires and get all the shit thats on them off