12 Second Club - Finally can say I ran 12's :)

Went to Etown tonight. Ran a 12.9 @ 114mph 2.3 60ft and 12.8 @ 115mph 2.2 60ft. This was on street tires. This is only my second time at the track and I am happy with myself. I have video and slips but will have to wait until Tuesday to post the slips. Video will be posted soon hopefully.

U have an 11 sec car on some drag radials !

U have an 11 sec car on some drag radials !

I can definitely see 11's with some radials but I can also see my rear breaking LOL Once I have the cash for a rear I'll let the 10 bolt go out in a blaze of glory on some nice radials lol

http://www.youtube.com/watch?v=SYvQbWHKpY0

http://www.youtube.com/watch?v=Ss7MMLtFgrc

i say you need to run that camaro at atco everyone says that their car runs faster there then at island or etown

atco isn't too 10 bolt freindly lol.

not bad john, now you just gotta get faster since you're still running the same times as brian did with the car lol.

http://img34.imageshack.us/img34/261/etown102910.th.jpg (http://img34.imageshack.us/i/etown102910.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

i say you need to run that camaro at atco everyone says that their car runs faster there then at island or etown

I run the same at atco as I do at e town.... Only difference is e town's prep sucks on a street night, and atco seems to prep well all the time...

I run the same at atco as I do at e town.... Only difference is e town's prep sucks on a street night, and atco seems to prep well all the time...

Yeah if you are one of the first 10 cars going, you spin all the way from start to finish.

with that mp you got a 11 second car, put a drag radial on it and see what it well do .if you dont do 11 you well be real close to it bro .

i say you need to run that camaro at atco everyone says that their car runs faster there then at island or etown

Thats false brotha. I have run my car at all the tracks in NJ and atco and englishtown i have run the same time and island i ran alittle bit slower but not much.

What do you have done to this beast JohnnyBz28??

Went to Etown tonight. Ran a 12.9 @ 114mph 2.3 60ft and 12.8 @ 115mph 2.2 60ft. This was on street tires. This is only my second time at the track and I am happy with myself. I have video and slips but will have to wait until Tuesday to post the slips. Video will be posted soon hopefully.


Whats done to your car? i agree you have a low 12 sec high 11 sec car on DR's.

Whats done to your car? i agree you have a low 12 sec high 11 sec car on DR's.

LS6 Intake (came stock)
Texas Speed PRC Stage 1 LS6 heads w/ PRC dual springs .650 lift milled to 61cc
Patriot 7.4 hardened push rods
Patriot 225/229 .580/.590 114+4 LSA Cam
LS2 Timing Chain
MTI Clear lid
LPP Stainless Steel Long Tubes
LPP Stainless Steel ORY
At the time LPP true duals (currently using a dumped before the axle resonator)

compression is 11:1 static

nice runs!

nice runs!



Thanks

what are your mods?

LS6 Intake (came stock)
Texas Speed PRC Stage 1 LS6 heads w/ PRC dual springs .650 lift milled to 61cc
Patriot 7.4 hardened push rods
Patriot 225/229 .580/.590 114+4 LSA Cam
LS2 Timing Chain
MTI Clear lid
LPP Stainless Steel Long Tubes
LPP Stainless Steel ORY
At the time LPP true duals (currently using a dumped before the axle resonator)

compression is 11:1 static

what are your mods?

^^^^^^^^^^^^^^^^^^

def get some drs for that thing. 11s!

Lol horrible launch. With dr's you would run low 12's easy just launching a little harder and gripping

Lol horrible launch. With dr's you would run low 12's easy just launching a little harder and gripping



Launch was indeed bad but that was due to me being afraid of breaking the stock 10 bolt. I currently have a 12 bolt with 4.10's. Finishing up my rear suspension next week so everything should be good for this season.

Launch was indeed bad but that was due to me being afraid of breaking the stock 10 bolt. I currently have a 12 bolt with 4.10's. Finishing up my rear suspension next week so everything should be good for this season.

Yea I could see that you wur trying not to launch it hard...

I got this same cam. How you like it with some heads? I can't wait to get some 243s on my motor!

I would love to track mine, but I just can't risk my 10 bolt anytime soon :(

I got this same cam. How you like it with some heads? I can't wait to get some 243s on my motor!

I would love to track mine, but I just can't risk my 10 bolt anytime soon :(



It's a good cam for someone to start with but I would have preferred something more aggressive.

I wanted to track the car bad so I just didn't launch super hard.

What mods do you have?

What mods do you have?

http://www.ls1tech.com/forums/14235413-post14.html