Help me pick a cam for my Silverado
10-30-2010, 01:32 PM
#1
TECH Resident
Thread Starter
iTrader: (4)
Join Date: May 2002
Location: Hell
Posts: 769
Likes: 0
Received 0 Likes
on
0 Posts
Help me pick a cam for my Silverado I replaced the 4.8 with a 6.0 last spring. I installed LS3 heads with the L92 truck intake. The cam is a 03 zo6 cam.
I was looking into the Thunder Racing cheatr cam v3 219/230 .607/.604 on a117 LSA. I will be staying with the stock manifolds to keep it quiet as I daily drive it and use it for grouse hunting out in the woods and towing my Sea Doo. I never plan on taking it to the dragstrip. The tranny is a 4L65.
Does anybody have any other suggestions? Remember stock manifolds. I might get high flowing cats with a bigger pipe diameter off the manifolds to the muffler.
__________________
I was looking into the Thunder Racing cheatr cam v3 219/230 .607/.604 on a117 LSA. I will be staying with the stock manifolds to keep it quiet as I daily drive it and use it for grouse hunting out in the woods and towing my Sea Doo. I never plan on taking it to the dragstrip. The tranny is a 4L65.
Does anybody have any other suggestions? Remember stock manifolds. I might get high flowing cats with a bigger pipe diameter off the manifolds to the muffler.
__________________
10-31-2010, 11:27 PM
#6
12 Second Club
Join Date: Feb 2006
Location: Catlettsburg, Ky
Posts: 876
Likes: 0
Received 0 Likes
on
0 Posts
Those l92's are really gonna be choked up trying to push the exhaust out of those stock manifolds.
The cam will most likely help tremendously, but you'll definately be leaving some power on the table without headers, more so than on a standard cathedral port head
The cam will most likely help tremendously, but you'll definately be leaving some power on the table without headers, more so than on a standard cathedral port head
