Gen 5 Camaro Racing Tech, Results - New best 1/4 time

Made a few runs last night at Aalabama International Dragway in Steel last night. Here is the information of my best run last night. I will post up my slip when I scan it. I want to give a big shout out to TSP for some great products!

Tires used on the pass: Stock P-Zero’s
Performance Mods : In signature
Category submitted for: Internal mods
R/T.......... .157
60'............. 1.699
330'........... 4.875
660'........... 7.506
660’ mph... 93.75
1000'..........
1320'..........11.67
1320’ mph… 117.69
Name of the track: Alabama International Dragway, Steel Alabama
Date of pass: 10/29/2010

Very nice, a 1.6 60' on stock Pirelli's :hail:

wow drag radial 60's from street tires. must have a killer suspension setup.

Wow that car is moving. Killer 60ft on street tires

Congrats on the new times!!!!

reread some older posts -
ran a 14.0 in bad weather
after bolt-ons went 12.8 at 109
converter swap went a 11.6 at 117

Am I missing something? Not quite up to speed on the new Camaros just yet???

117? with bolt ons and convertor? I am the MOderator doing these lists and that does not add up.....

I also have a TSP VVT cam with ported PRC LS3 heads in the car now. I went 11.71 @ 117.7 today with a 1.74 sixty foot. I would have tried to leave harder if I thought the track was going to hook that well. The car has stock suspension.

How are the rears in the new camaros compared to the 98-02?

Congrats on the 11 second pass; thats hooking on the street tires. Did leave some mods out though ;)

Oh ok, h/c... Nice runs

I also have a TSP VVT cam with ported PRC LS3 heads in the car now. I went 11.71 @ 117.7 today with a 1.74 sixty foot. I would have tried to leave harder if I thought the track was going to hook that well. The car has stock suspension.

Allot more clear now, not taking ANYTHING away from your accomplishment, just more understandable. Once again, great job and nice work!!!

How are the rears in the new camaros compared to the 98-02?

They seem to be just as hit and miss as the 10 bolt. The problem with the 5th gen is half shafts. People have broke them on stock cars. My guess is wheel hop has a lot to do with it.

Yes,that did a little too fast for just Bolt-on's to me too but still a great time for a heavy car !!!!!!!!!!!!!!!!

I'm waiting on wheels and tires. I hope to knock off a few more tenths in the next few weeks.

thats moving, i see low 11s in your future, congrats

Yes,that did a little too fast for just Bolt-on's to me too but still a great time for a heavy car !!!!!!!!!!!!!!!!

Someone has gone 11.6 with a bolt on ls3 and 17 inch bogarts/slicks.

He claims an 11.6 is his best run but only has a vid of a few 11.7's. Full weight. Full exhaust, tune CAI. Full weight, stock clutch, stock suspension, even stock gears. Traps from 114-118. I wonder what he could get with some 4.10's?

http://www.youtube.com/watch?v=3rx5Lt6kFLA&feature=related

I dont see anyone else on the list at c5 even using a 17 inch rim with slicks on a bolt on ls3. I wish some more people would start doing it.